The TDA8579T is a two channel differential amplifier with 0 dB gain and low distortion. The device has been primarily developed for car radio applications where long connections between signal sources and amplifiers (or boosters) are necessary and where ground noise has to be eliminated. The device is intended to be used to receive line inputs in audio appli.
Excellent common-mode rejection, up to high frequencies
Elimination of source resistance dependency in the common-mode rejection
Few external components
High supply voltage ripple rejection
Low noise
Low distortion
All pins protected against electrostatic discharge
AC and DC short-circuit safe to ground and VCC
Fast DC settling
3. Quick reference data
Table 1. Symbol VCC ICC GV SVRR Vno |Zi| CMRR
Quick reference data Parameter supply voltage supply current voltage gain supply voltage ripple rejection noise output voltage input impedance common-mode rejection ratio
Conditi.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | TDA8579 |
NXP |
Dual common-mode rejection differential line receiver | |
2 | TDA8571J |
NXP |
4 x 40 W BTL quad car radio power amplifier | |
3 | TDA8574 |
NXP |
Class-H high-output voltage level line driver | |
4 | TDA8575 |
NXP |
Ground noise isolation amplifier | |
5 | TDA8576T |
NXP |
Class-H high-output voltage level line driver | |
6 | TDA8577 |
Philips |
Dual common-mode rejection differential line receiver | |
7 | TDA8578 |
NXP |
Dual common-mode rejection differential line receiver | |
8 | TDA8501 |
NXP |
PAL/NTSC encoder | |
9 | TDA8505 |
NXP |
SECAM encoder | |
10 | TDA8510J |
NXP |
26 W BTL and 2 x 13 W SE power amplifiers | |
11 | TDA8511J |
NXP |
4 x 13 W single-ended power amplifiers | |
12 | TDA8512J |
NXP |
26 W BTL and 2 x 13 W SE or 4 x 13 W SE power amplifier |