The TDA8577 is a two channel differential amplifier with 0 dB gain and low distortion. The device has been primarily developed for car radio applications where long connections between signal sources and amplifiers (or boosters) are necessary and where ground noise has to be eliminated. The device is intended to be used to receive line inputs in audio applic.
• Excellent common-mode rejection, up to high frequencies
• Elimination of source resistance dependency in the common-mode rejection
• Few external components
• High supply voltage ripple rejection
• Low noise
• Low distortion
• All pins protected against electrostatic discharge
• AC and DC short-circuit safe to ground and VCC
• Fast DC settling.
GENERAL DESCRIPTION
The TDA8577 is a two channel differential amplifier with 0 dB gain and low distortion. The device has been primarily developed for car radio applications where long connections between signal sources and amplifiers (or boosters) a.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | TDA8571J |
NXP |
4 x 40 W BTL quad car radio power amplifier | |
2 | TDA8574 |
NXP |
Class-H high-output voltage level line driver | |
3 | TDA8575 |
NXP |
Ground noise isolation amplifier | |
4 | TDA8576T |
NXP |
Class-H high-output voltage level line driver | |
5 | TDA8578 |
NXP |
Dual common-mode rejection differential line receiver | |
6 | TDA8579 |
NXP |
Dual common-mode rejection differential line receiver | |
7 | TDA8579T |
NXP |
Dual common-mode rejection differential line receiver | |
8 | TDA8501 |
NXP |
PAL/NTSC encoder | |
9 | TDA8505 |
NXP |
SECAM encoder | |
10 | TDA8510J |
NXP |
26 W BTL and 2 x 13 W SE power amplifiers | |
11 | TDA8511J |
NXP |
4 x 13 W single-ended power amplifiers | |
12 | TDA8512J |
NXP |
26 W BTL and 2 x 13 W SE or 4 x 13 W SE power amplifier |