The TDA8576T is a two channel class-H high-output voltage line driver for use in car audio applications. The line driver operates as a non-inverting amplifier with a gain of 6 dB and a single-ended output. Due to the class-H voltage lifting principle the voltage swing over the load is more than the supply voltage. QUICK REFERENCE DATA SYMBOL VCC ICC Gv Vo(rm.
• Output voltage swing larger than supply voltage
• High supply voltage ripple rejection
• Low distortion
• Low noise
• ESD protected on all pins. GENERAL DESCRIPTION The TDA8576T is a two channel class-H high-output voltage line driver for use in car audio applications. The line driver operates as a non-inverting amplifier with a gain of 6 dB and a single-ended output. Due to the class-H voltage lifting principle the voltage swing over the load is more than the supply voltage. QUICK REFERENCE DATA SYMBOL VCC ICC Gv Vo(rms) SVRR THD Vno Zo PARAMETER supply voltage supply current voltage gain.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | TDA8571J |
NXP |
4 x 40 W BTL quad car radio power amplifier | |
2 | TDA8574 |
NXP |
Class-H high-output voltage level line driver | |
3 | TDA8575 |
NXP |
Ground noise isolation amplifier | |
4 | TDA8577 |
Philips |
Dual common-mode rejection differential line receiver | |
5 | TDA8578 |
NXP |
Dual common-mode rejection differential line receiver | |
6 | TDA8579 |
NXP |
Dual common-mode rejection differential line receiver | |
7 | TDA8579T |
NXP |
Dual common-mode rejection differential line receiver | |
8 | TDA8501 |
NXP |
PAL/NTSC encoder | |
9 | TDA8505 |
NXP |
SECAM encoder | |
10 | TDA8510J |
NXP |
26 W BTL and 2 x 13 W SE power amplifiers | |
11 | TDA8511J |
NXP |
4 x 13 W single-ended power amplifiers | |
12 | TDA8512J |
NXP |
26 W BTL and 2 x 13 W SE or 4 x 13 W SE power amplifier |