TDA8578 The TDA8578 is a two-channel differential amplifier in a 16 pin DIL or SO package intended to receive line inputs in audio applications requiring a high-level of common-mode rejection. The amplifier has a gain of 0 dB and a low distortion. The device is primarily developed for those car radio applications where long connections between signal sourc.
• Excellent common-mode rejection up to high frequencies
• Elimination of source resistance in the common-mode rejection
• Few external components
• High supply voltage ripple rejection
• Low noise
• Low distortion
• Protected against electrostatic discharge
• AC and DC short circuit safe to ground and VCC
• Fast DC settling. QUICK REFERENCE DATA SYMBOL VCC ICC Gv SVRR Vno Zi CMRR PARAMETER supply voltage supply current voltage gain supply voltage ripple rejection noise output voltage input impedance common-mode rejection ratio Rs = 0 Ω VCC = 8.5 V CONDITIONS 5 − −0.5 −55 − 100 − MIN. TYP. 8.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | TDA8571J |
NXP |
4 x 40 W BTL quad car radio power amplifier | |
2 | TDA8574 |
NXP |
Class-H high-output voltage level line driver | |
3 | TDA8575 |
NXP |
Ground noise isolation amplifier | |
4 | TDA8576T |
NXP |
Class-H high-output voltage level line driver | |
5 | TDA8577 |
Philips |
Dual common-mode rejection differential line receiver | |
6 | TDA8579 |
NXP |
Dual common-mode rejection differential line receiver | |
7 | TDA8579T |
NXP |
Dual common-mode rejection differential line receiver | |
8 | TDA8501 |
NXP |
PAL/NTSC encoder | |
9 | TDA8505 |
NXP |
SECAM encoder | |
10 | TDA8510J |
NXP |
26 W BTL and 2 x 13 W SE power amplifiers | |
11 | TDA8511J |
NXP |
4 x 13 W single-ended power amplifiers | |
12 | TDA8512J |
NXP |
26 W BTL and 2 x 13 W SE or 4 x 13 W SE power amplifier |