The TDA8574(T) is a two channel class-H high-output voltage line driver for use in car audio applications. The line driver behaves as a non-inverting amplifier with a gain of 8 dB and a single-ended output. Due to the class-H voltage lifting principle the voltage swing over the load is more than the supply voltage. With a supply voltage of 9 V the output vol.
• Output voltage swing larger than supply voltage
• High supply voltage ripple rejection
• Low distortion
• Low noise
• ESD protected on all pins. GENERAL DESCRIPTION The TDA8574(T) is a two channel class-H high-output voltage line driver for use in car audio applications. The line driver behaves as a non-inverting amplifier with a gain of 8 dB and a single-ended output. Due to the class-H voltage lifting principle the voltage swing over the load is more than the supply voltage. With a supply voltage of 9 V the output voltage swing over the load will be 14 V (peak-to-peak). QUICK REFERENCE DAT.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | TDA8571J |
NXP |
4 x 40 W BTL quad car radio power amplifier | |
2 | TDA8575 |
NXP |
Ground noise isolation amplifier | |
3 | TDA8576T |
NXP |
Class-H high-output voltage level line driver | |
4 | TDA8577 |
Philips |
Dual common-mode rejection differential line receiver | |
5 | TDA8578 |
NXP |
Dual common-mode rejection differential line receiver | |
6 | TDA8579 |
NXP |
Dual common-mode rejection differential line receiver | |
7 | TDA8579T |
NXP |
Dual common-mode rejection differential line receiver | |
8 | TDA8501 |
NXP |
PAL/NTSC encoder | |
9 | TDA8505 |
NXP |
SECAM encoder | |
10 | TDA8510J |
NXP |
26 W BTL and 2 x 13 W SE power amplifiers | |
11 | TDA8511J |
NXP |
4 x 13 W single-ended power amplifiers | |
12 | TDA8512J |
NXP |
26 W BTL and 2 x 13 W SE or 4 x 13 W SE power amplifier |