IN1 IN2 OUT1 GND OUT2 N.C. VM Control signal input pin 1 Control signal input pin 2 Output pin 1 Ground pin Output pin 2 No-connect Power supply voltage pin VM ISD detection OUT1 Motor OUT2 ISD detection GND 2 2017-04-14 TB6568KQ Absolute Maximum Ratings (Note) (Ta = 25°C) Characteristics Symbol Rating Unit Power supply voltage VM 50 V Output.
• Power supply voltage: 50 V (max)
• Output current: 3 A (max)
• Output ON-resistance: 0.55 Ω (typ.)
• PWM control
• CW/CCW/Short Brake/Stop modes
• Overcurrent shutdown circuit (ISD)
• Overvoltage shutdown circuit (VSD)
• Thermal shutdown circuit (TSD)
• Undervoltage lockout circuit (UVLO)
• Dead time for preventing shoot-through current
Weight: 2.2 g (typ.)
© 2014 TOSHIBA Corporation
1
2017-04-14
TB6568KQ
Block Diagram (application circuit example)
The application circuits shown in this document are provided for reference purposes only. Thorough evaluation is required, especially at the.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | TB6560-3N |
ETC |
the Stepper Motor Driver Board User Manual | |
2 | TB6560AFG |
Toshiba |
PWM Chopper-Type Bipolar Driver | |
3 | TB6560AFTG |
Toshiba |
PWM Chopper-Type Bipolar Driver IC | |
4 | TB6560AHQ |
Toshiba |
PWM Chopper-Type Bipolar Driver | |
5 | TB6560FG |
Toshiba Semiconductor |
PWM Chopper-Type bipolar Stepping Motor Driver | |
6 | TB6560HQ |
Toshiba Semiconductor |
PWM Chopper-Type bipolar Stepping Motor Driver | |
7 | TB6561FG |
Toshiba |
Dual Full-Bridge Driver IC | |
8 | TB6561NG |
Toshiba |
Dual Full-Bridge Driver | |
9 | TB6562AFG |
Toshiba |
Dual Full-Bridge Driver | |
10 | TB6562ANG |
Toshiba Semiconductor |
Dual Full-Bridge Driver | |
11 | TB6564AHQ |
Toshiba |
Stepping Motor Driver | |
12 | TB6569FG |
Toshiba Semiconductor |
Full-Bridge DC Motor Driver |