TB6561FG Pin No. Symbol Function Description Remarks 1 S-GND Signal ground ⎯ 2 Vreg 5 V output pin Connect a capacitor (0.1 μF) between this pin and S-GND pin. 3 SB Standby pin High: Start, Low: Standby, Built in pull-down resistance (100 kΩ (typ.)). 4 PWMA Rotation direction control pin (chA) Apply a 0-V/5-V signal, Built in pull-down resist.
• Power supply voltage: 40 V (max)
• Output current: 1.5 A (max)
• Low ON-resistance: 1.5 Ω (upper and lower transistors/typ.)
• Direct PWM current control system
• Power-saving function
• Forward/reverse/short brake/stop modes
• Over-current protection: ILIM = 2.5 A (typ.)
• Thermal shutdown
• Package: SSOP30-P-375-1.00
SSOP30-P-375-1.00 Weight: 0.63g (typ.)
The following conditions apply to solderability: About solderability, following conditions were confirmed (1)Use of Sn-37Pb solder Bath
·solder bath temperature: 230°C
·dipping time: 5 seconds
·the number of times: once
·use of R-type f.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | TB6561NG |
Toshiba |
Dual Full-Bridge Driver | |
2 | TB6560-3N |
ETC |
the Stepper Motor Driver Board User Manual | |
3 | TB6560AFG |
Toshiba |
PWM Chopper-Type Bipolar Driver | |
4 | TB6560AFTG |
Toshiba |
PWM Chopper-Type Bipolar Driver IC | |
5 | TB6560AHQ |
Toshiba |
PWM Chopper-Type Bipolar Driver | |
6 | TB6560FG |
Toshiba Semiconductor |
PWM Chopper-Type bipolar Stepping Motor Driver | |
7 | TB6560HQ |
Toshiba Semiconductor |
PWM Chopper-Type bipolar Stepping Motor Driver | |
8 | TB6562AFG |
Toshiba |
Dual Full-Bridge Driver | |
9 | TB6562ANG |
Toshiba Semiconductor |
Dual Full-Bridge Driver | |
10 | TB6564AHQ |
Toshiba |
Stepping Motor Driver | |
11 | TB6568KQ |
Toshiba Semiconductor |
Full-Bridge DC Motor Driver | |
12 | TB6569FG |
Toshiba Semiconductor |
Full-Bridge DC Motor Driver |