Torque setting input (current setting) (built-in pull-down resistor) Torque setting input (current setting) (built-in pull-down resistor) Step transition, clock input (built-in pull-down resistor) H: Enable; L: All output OFF (built-in pull-down resistor) L: Reset (output is reset to its initial state) (built-in pull-down resistor) Signal ground (control sid.
•
•
•
•
•
•
www.DataSheet4U.com
TB6560FG
Single-chip bipolar sinusoidal micro-step stepping motor driver Uses high withstand voltage BiCD process: Ron (upper lower) = 0.6 Ω (typ.) Forward and reverse rotation control available Selectable phase drive (2, 1-2, W1-2, and 2W1-2) High output withstand voltage: VCEO = 40 V High output current: IOUT = HQ: 3.5 A (peak) FG: 2.5 A (peak) Packages: HZIP25-P-1.27/HQFP64-P-1010-0.50 Built-in input pull-down resistor: 100 kΩ (typ.) Output monitor pin equipped: MO current (IMO (max) = 1 mA) Equipped with reset and enable pins Built-in overheat protection.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | TB6560-3N |
ETC |
the Stepper Motor Driver Board User Manual | |
2 | TB6560AFG |
Toshiba |
PWM Chopper-Type Bipolar Driver | |
3 | TB6560AFTG |
Toshiba |
PWM Chopper-Type Bipolar Driver IC | |
4 | TB6560AHQ |
Toshiba |
PWM Chopper-Type Bipolar Driver | |
5 | TB6560HQ |
Toshiba Semiconductor |
PWM Chopper-Type bipolar Stepping Motor Driver | |
6 | TB6561FG |
Toshiba |
Dual Full-Bridge Driver IC | |
7 | TB6561NG |
Toshiba |
Dual Full-Bridge Driver | |
8 | TB6562AFG |
Toshiba |
Dual Full-Bridge Driver | |
9 | TB6562ANG |
Toshiba Semiconductor |
Dual Full-Bridge Driver | |
10 | TB6564AHQ |
Toshiba |
Stepping Motor Driver | |
11 | TB6568KQ |
Toshiba Semiconductor |
Full-Bridge DC Motor Driver | |
12 | TB6569FG |
Toshiba Semiconductor |
Full-Bridge DC Motor Driver |