Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Symbol S-GND Vreg SB PWMA IN1A IN2A VCC OUT1A N.C. P-GNDA OUT2A S-GND S-GND OUT2B P-GNDB N.C. OUT1B VCC IN2B IN1B PWMB CLD VCC S-GND TB6561NG Function Description Remarks Signal ground 5-V output pin Standby pin Rotation direction control pin (chA) Input pin 1 (chA) Input pin 2 (chA.
• Power supply voltage: 40 V (max)
• Output current: 1.5 A (max)
• Low ON-resistance: 1.5 Ω (upper and lower transistors/typ.)
• Direct PWM current control system
• Power-saving function
• Forward/reverse/short brake/stop modes
• Over-current protection: ILIM = 2.5 A (typ.)
• Thermal shutdown
• Package: SDIP-24-P-300-1.78
Weight: 1.62 g (typ.)
The following conditions apply to solderability: About solderability, following conditions were confirmed (1)Use of Sn-37Pb solder Bath
·solder bath temperature: 230℃
·dipping time: 5 seconds
·the number of times: once
·use of R-type flux (2)Use of Sn-.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | TB6561FG |
Toshiba |
Dual Full-Bridge Driver IC | |
2 | TB6560-3N |
ETC |
the Stepper Motor Driver Board User Manual | |
3 | TB6560AFG |
Toshiba |
PWM Chopper-Type Bipolar Driver | |
4 | TB6560AFTG |
Toshiba |
PWM Chopper-Type Bipolar Driver IC | |
5 | TB6560AHQ |
Toshiba |
PWM Chopper-Type Bipolar Driver | |
6 | TB6560FG |
Toshiba Semiconductor |
PWM Chopper-Type bipolar Stepping Motor Driver | |
7 | TB6560HQ |
Toshiba Semiconductor |
PWM Chopper-Type bipolar Stepping Motor Driver | |
8 | TB6562AFG |
Toshiba |
Dual Full-Bridge Driver | |
9 | TB6562ANG |
Toshiba Semiconductor |
Dual Full-Bridge Driver | |
10 | TB6564AHQ |
Toshiba |
Stepping Motor Driver | |
11 | TB6568KQ |
Toshiba Semiconductor |
Full-Bridge DC Motor Driver | |
12 | TB6569FG |
Toshiba Semiconductor |
Full-Bridge DC Motor Driver |