The PCA9505/PCA9506 provide 40-bit parallel input/output (I/O) port expansion for I2Cbus applications organized in 5 banks of 8 I/Os. At 5 V supply voltage, the outputs are capable of sourcing 10 mA and sinking 15 mA with a total package load of 600 mA to allow direct driving of 40 LEDs. Any of the 40 I/O ports can be configured as an input or output. Output.
• Standard mode (100 kHz) and Fast mode (400 kHz) compatible I2C-bus serial interface
• 2.3 V to 5.5 V operation with 5.5 V tolerant I/Os
• 40 configurable I/O pins that default to inputs at power-up
• PCA9505 includes 100 kΩ internal pull-up resistors on all the I/Os
• Outputs:
– Totem-pole (10 mA source, 15 mA sink) with controlled edge rate output structure
– Active LOW output enable (OE) input pin 3-states all outputs
– Output state change on Acknowledge
– Open-drain active LOW interrupt (INT) output pin allows monitoring of logic level
change of pins programmed as inputs
NXP Semiconducto.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | PCA9500 |
NXP |
8-bit I2C and SMBus I/O port | |
2 | PCA9501 |
NXP |
8-bit I2C and SMBus I/O port | |
3 | PCA9502 |
NXP Semiconductors |
8-bit I/O expander | |
4 | PCA9504A |
NXP |
Glue chip 4 | |
5 | PCA9505 |
NXP |
40-bit I2C-bus I/O port | |
6 | PCA9507 |
NXP Semiconductors |
2-wire serial bus extender | |
7 | PCA9508 |
NXP |
Hot swappable level translating I2C-bus repeater | |
8 | PCA9509 |
NXP |
Level translating I2C-bus/SMBus repeater | |
9 | PCA9510 |
NXP |
Hot swappable I2C and SMBus bus buffer | |
10 | PCA9510A |
NXP Semiconductors |
Hot swappable I2C-bus and SMBus bus buffer | |
11 | PCA9511 |
NXP |
Hot swappable I2C and SMBus bus buffer | |
12 | PCA9511A |
NXP Semiconductors |
Hot swappable I2C-bus and SMBus bus buffer |