The PCA9510 and PCA9511 are hot swappable I2C and SMBus buffers that allows I/O card insertion into a live backplane without corrupting the data and clock buses. Control circuitry prevents the backplane from being connected to the card until a stop command or bus idle occurs on the backplane without bus contention on the card. When the connection is made, th.
• Bi-directional buffer for SDA and SCL lines increases fanout and
prevents SDA and SCL corruption during live board insertion and removal from multi-point backplane systems
• Compatible with I2C standard mode, I2C fast mode, and SMBus
standards
• ∆V/∆t rise time accelerators on all SDA and SCL lines (PCA9511
only)
• Rise time accelerator threshold of 0.6 V
• Active high ENABLE input
• Active high READY open-drain output
• High impedance SDA and SCL pins for VCC = 0 V
• 1 V precharge on all SDA and SCL lines (PCA9510 IN only)
• Supports clock stretching and multiple master
arbitration/sync.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | PCA9510A |
NXP Semiconductors |
Hot swappable I2C-bus and SMBus bus buffer | |
2 | PCA9511 |
NXP |
Hot swappable I2C and SMBus bus buffer | |
3 | PCA9511A |
NXP Semiconductors |
Hot swappable I2C-bus and SMBus bus buffer | |
4 | PCA9512 |
NXP |
Level shifting hot swappable I2C and SMBus buffer | |
5 | PCA9512A |
NXP |
Level shifting hot swappable I2C-bus and SMBus bus buffer | |
6 | PCA9512B |
NXP |
Level shifting hot swappable I2C-bus and SMBus bus buffer | |
7 | PCA9513 |
Philips |
Hot swappable I2C and SMBus bus buffer | |
8 | PCA9513A |
NXP Semiconductors |
Hot swappable I2C-bus and SMBus bus buffer | |
9 | PCA9514 |
Philips |
Hot swappable I2C and SMBus bus buffer | |
10 | PCA9514A |
NXP Semiconductors |
Hot swappable I2C-bus and SMBus bus buffer | |
11 | PCA9515 |
NXP |
I2C-bus repeater | |
12 | PCA9515A |
NXP |
I2C-bus repeater |