The PCA9511A is a hot swappable I2C-bus and SMBus buffer that allows I/O card insertion into a live backplane without corrupting the data and clock buses. Control circuitry prevents the backplane from being connected to the card until a stop command or bus idle occurs on the backplane without bus contention on the card. When the connection is made, the PCA95.
s Bidirectional buffer for SDA and SCL lines increases fan out and prevents SDA and SCL corruption during live board insertion and removal from multi-point backplane systems s Compatible with I2C-bus standard mode, I2C-bus fast mode, and SMBus standards s Built-in ∆V/∆t rise time accelerators on all SDA and SCL lines (0.6 V threshold) s Active HIGH ENABLE input s Active HIGH READY open-drain output s High-impedance SDA and SCL pins for VCC = 0 V s 1 V precharge on all SDA and SCL lines s Supporting clock stretching and multiple master arbitration/synchronization s Operating power supply voltag.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | PCA9511 |
NXP |
Hot swappable I2C and SMBus bus buffer | |
2 | PCA9510 |
NXP |
Hot swappable I2C and SMBus bus buffer | |
3 | PCA9510A |
NXP Semiconductors |
Hot swappable I2C-bus and SMBus bus buffer | |
4 | PCA9512 |
NXP |
Level shifting hot swappable I2C and SMBus buffer | |
5 | PCA9512A |
NXP |
Level shifting hot swappable I2C-bus and SMBus bus buffer | |
6 | PCA9512B |
NXP |
Level shifting hot swappable I2C-bus and SMBus bus buffer | |
7 | PCA9513 |
Philips |
Hot swappable I2C and SMBus bus buffer | |
8 | PCA9513A |
NXP Semiconductors |
Hot swappable I2C-bus and SMBus bus buffer | |
9 | PCA9514 |
Philips |
Hot swappable I2C and SMBus bus buffer | |
10 | PCA9514A |
NXP Semiconductors |
Hot swappable I2C-bus and SMBus bus buffer | |
11 | PCA9515 |
NXP |
I2C-bus repeater | |
12 | PCA9515A |
NXP |
I2C-bus repeater |