The PCA9510A is a hot swappable I2C-bus and SMBus buffer that allows I/O card insertion into a live backplane without corrupting the data and clock buses. Control circuitry prevents the backplane from being connected to the card until a stop command or bus idle occurs on the backplane without bus contention on the card. When the connection is made, the PCA95.
I Bidirectional buffer for SDA and SCL lines increases fan-out and prevents SDA and SCL corruption during live board insertion and removal from multipoint backplane systems I Compatible with Standard-mode I2C-bus, Fast-mode I2C-bus, and SMBus standards I Active HIGH ENABLE input I Active HIGH READY open-drain output I High-impedance SDAn and SCLn pins for VCC = 0 V I 1 V precharge on SDAIN and SCLIN inputs I Supports clock stretching and multiple master arbitration and synchronization I Operating power supply voltage range: 2.7 V to 5.5 V I 5 V tolerant I/Os I 0 Hz to 400 kHz clock frequency I.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | PCA9510 |
NXP |
Hot swappable I2C and SMBus bus buffer | |
2 | PCA9511 |
NXP |
Hot swappable I2C and SMBus bus buffer | |
3 | PCA9511A |
NXP Semiconductors |
Hot swappable I2C-bus and SMBus bus buffer | |
4 | PCA9512 |
NXP |
Level shifting hot swappable I2C and SMBus buffer | |
5 | PCA9512A |
NXP |
Level shifting hot swappable I2C-bus and SMBus bus buffer | |
6 | PCA9512B |
NXP |
Level shifting hot swappable I2C-bus and SMBus bus buffer | |
7 | PCA9513 |
Philips |
Hot swappable I2C and SMBus bus buffer | |
8 | PCA9513A |
NXP Semiconductors |
Hot swappable I2C-bus and SMBus bus buffer | |
9 | PCA9514 |
Philips |
Hot swappable I2C and SMBus bus buffer | |
10 | PCA9514A |
NXP Semiconductors |
Hot swappable I2C-bus and SMBus bus buffer | |
11 | PCA9515 |
NXP |
I2C-bus repeater | |
12 | PCA9515A |
NXP |
I2C-bus repeater |