The PCA9501 is an 8-bit I/O expander with an on-board 2-kbit EEPROM. The I/O expandable eight quasi-bidirectional data pins can be independently assigned as inputs or outputs to monitor board level status or activate indicator devices such as LEDs. The system master writes to the I/O configuration bits in the same way as for the PCF8574. The data for each inp.
I 8 general purpose input/output expander/collector I Replacement for PCF8574 with integrated 2-kbit EEPROM I Internal 256 × 8 EEPROM I Self timed write cycle (5 ms typical) I 16 byte page write operation I I2C-bus and SMBus interface logic I Internal power-on reset I Noise filter on SCL/SDA inputs I Active LOW interrupt output I 6 address pins allowing up to 64 devices on the I2C-bus/SMBus I No glitch on power-up I Supports hot insertion I Power-up with all channels configured as inputs NXP Semiconductors PCA9501 8-bit I2C-bus and SMBus I/O port with interrupt, 2-kbit EEPROM I Low standby cu.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | PCA9500 |
NXP |
8-bit I2C and SMBus I/O port | |
2 | PCA9502 |
NXP Semiconductors |
8-bit I/O expander | |
3 | PCA9504A |
NXP |
Glue chip 4 | |
4 | PCA9505 |
NXP |
40-bit I2C-bus I/O port | |
5 | PCA9506 |
NXP Semiconductors |
40-bit I2C-bus I/O port | |
6 | PCA9507 |
NXP Semiconductors |
2-wire serial bus extender | |
7 | PCA9508 |
NXP |
Hot swappable level translating I2C-bus repeater | |
8 | PCA9509 |
NXP |
Level translating I2C-bus/SMBus repeater | |
9 | PCA9510 |
NXP |
Hot swappable I2C and SMBus bus buffer | |
10 | PCA9510A |
NXP Semiconductors |
Hot swappable I2C-bus and SMBus bus buffer | |
11 | PCA9511 |
NXP |
Hot swappable I2C and SMBus bus buffer | |
12 | PCA9511A |
NXP Semiconductors |
Hot swappable I2C-bus and SMBus bus buffer |