The NX3L2T384 is a dual low-ohmic single-pole single-throw analog switch. Each switch has two input/output terminals (nY and nZ) and an active LOW enable input (nE). When pin nE is HIGH, the analog switch is turned off. Schmitt trigger action at the enable input (nE) makes the circuit tolerant to slower input rise and fall times. A low input voltage threshol.
Wide supply voltage range from 1.4 V to 4.3 V
Very low ON resistance (peak):
1.6 (typical) at VCC = 1.4 V 1.0 (typical) at VCC = 1.65 V 0.55 (typical) at VCC = 2.3 V 0.50 (typical) at VCC = 2.7 V 0.50 (typical) at VCC = 4.3 V
High noise immunity
ESD protection: HBM JESD22-A114F Class 3A exceeds 7500 V MM JESD22-A115-A exceeds 200 V CDM AEC-Q100-011 revision B exceeds 1000 V IEC61000-4-2 contact discharge exceeds 4000 V for switch ports
CMOS low-power consumption
Latch-up performance exceeds 100 mA per JESD 78B Class II Level A
1.8 V control logic at VC.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | NX3L2T66 |
NXP Semiconductors |
Dual low-ohmic single-pole single-throw analog switch | |
2 | NX3L2267 |
NXP |
Low-ohmic dual single-pole double-throw analog switch | |
3 | NX3L2267S |
NXP |
Low-ohmic dual single-pole double-throw analog switch | |
4 | NX3L2467 |
NXP |
Double-pole Double-throw Analog Switch | |
5 | NX3L2G384 |
NXP Semiconductors |
Dual low-ohmic single-pole single-throw analog switch | |
6 | NX3L2G66 |
NXP |
Dual low-ohmic single-pole single-throw analog switch | |
7 | NX3L1G3157 |
NXP Semiconductors |
Low-ohmic single-pole double-throw analog switch | |
8 | NX3L1G3157-Q100 |
NXP |
Low-ohmic single-pole double-throw analog switch | |
9 | NX3L1G384 |
NXP |
Low-ohmic single-pole single-throw analog switch | |
10 | NX3L1G53 |
NXP |
Low-ohmic Single-pole Double-throw Analog Switch | |
11 | NX3L1G66 |
NXP Semiconductors |
Low-voltage analog switch | |
12 | NX3L1G66-Q100 |
NXP |
Low-ohmic single-pole single-throw analog switch |