The NX3L2467 is a dual low-ohmic double-pole double-throw analog switch suitable for use as an analog or digital multiplexer/demultiplexer. It consists of four switches, each with two independent input/outputs (nY0 and nY1) and a common input/output (nZ). The two digital inputs (1S and 2S) are used to select the switch position. 1S is used in selecting the i.
• Wide supply voltage range from 1.4 V to 4.3 V
• Very low ON resistance (peak):
– 1.7 Ω (typical) at VCC = 1.4 V
– 1.0 Ω (typical) at VCC = 1.65 V
– 0.6 Ω (typical) at VCC = 2.3 V
– 0.5 Ω (typical) at VCC = 2.7 V
– 0.5 Ω (typical) at VCC = 4.3 V
• Break-before-make switching
• High noise immunity
• ESD protection:
– HBM JESD22-A114F Class 3A exceeds 4000 V
– MM JESD22-A115-A exceeds 200 V
– CDM AEC-Q100-011 revision B exceeds 1000 V
– IEC61000-4-2 contact discharge exceeds 6000 V for switch ports
• CMOS low-power consumption
• Latch-up performance exceeds 100 mA per JESD 78B Class II Level A .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | NX3L2267 |
NXP |
Low-ohmic dual single-pole double-throw analog switch | |
2 | NX3L2267S |
NXP |
Low-ohmic dual single-pole double-throw analog switch | |
3 | NX3L2G384 |
NXP Semiconductors |
Dual low-ohmic single-pole single-throw analog switch | |
4 | NX3L2G66 |
NXP |
Dual low-ohmic single-pole single-throw analog switch | |
5 | NX3L2T384 |
NXP |
Dual low-ohmic single-pole single-throw analog switch | |
6 | NX3L2T66 |
NXP Semiconductors |
Dual low-ohmic single-pole single-throw analog switch | |
7 | NX3L1G3157 |
NXP Semiconductors |
Low-ohmic single-pole double-throw analog switch | |
8 | NX3L1G3157-Q100 |
NXP |
Low-ohmic single-pole double-throw analog switch | |
9 | NX3L1G384 |
NXP |
Low-ohmic single-pole single-throw analog switch | |
10 | NX3L1G53 |
NXP |
Low-ohmic Single-pole Double-throw Analog Switch | |
11 | NX3L1G66 |
NXP Semiconductors |
Low-voltage analog switch | |
12 | NX3L1G66-Q100 |
NXP |
Low-ohmic single-pole single-throw analog switch |