The NX3L2267S is a dual low-ohmic single-pole double-throw analog switch suitable for use as an analog or digital 2 : 1 multiplexer/demultiplexer. Each switch has a digital select input (nS), two independent inputs/outputs (nY0 and nY1) and a common input/output (nZ). The NX3L2267S includes termination resistors that improve noise immunity during overshoot e.
Wide supply voltage range from 1.4 V to 4.3 V
Very low ON resistance (peak):
1.65 (typical) at VCC = 1.4 V 0.95 (typical) at VCC = 1.65 V 0.55 (typical) at VCC = 2.3 V 0.50 (typical) at VCC = 2.7 V
0.50 (typical) at VCC = 4.3 V
Break-before-make switching
High noise immunity
ESD protection:
HBM JESD22-A114F Class 3A exceeds 7500 V MM JESD22-A115-A exceeds 200 V CDM AEC-Q100-011 revision B exceeds 1000 V
CMOS low-power consumption
Latch-up performance exceeds 100 mA per JESD78B Class II Level A
1.8 V control logic at VCC = 3.6 V
Control input accepts vo.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | NX3L2267 |
NXP |
Low-ohmic dual single-pole double-throw analog switch | |
2 | NX3L2467 |
NXP |
Double-pole Double-throw Analog Switch | |
3 | NX3L2G384 |
NXP Semiconductors |
Dual low-ohmic single-pole single-throw analog switch | |
4 | NX3L2G66 |
NXP |
Dual low-ohmic single-pole single-throw analog switch | |
5 | NX3L2T384 |
NXP |
Dual low-ohmic single-pole single-throw analog switch | |
6 | NX3L2T66 |
NXP Semiconductors |
Dual low-ohmic single-pole single-throw analog switch | |
7 | NX3L1G3157 |
NXP Semiconductors |
Low-ohmic single-pole double-throw analog switch | |
8 | NX3L1G3157-Q100 |
NXP |
Low-ohmic single-pole double-throw analog switch | |
9 | NX3L1G384 |
NXP |
Low-ohmic single-pole single-throw analog switch | |
10 | NX3L1G53 |
NXP |
Low-ohmic Single-pole Double-throw Analog Switch | |
11 | NX3L1G66 |
NXP Semiconductors |
Low-voltage analog switch | |
12 | NX3L1G66-Q100 |
NXP |
Low-ohmic single-pole single-throw analog switch |