The NX3L1G3157 is a low-ohmic single-pole double-throw analog switch suitable for use as an analog or digital 2:1 multiplexer/demultiplexer. It has a digital select input (S), two independent inputs/outputs (Y0 and Y1) and a common input/output (Z). Schmitt trigger action at the digital input makes the circuit tolerant to slower input rise and fall times. Th.
Wide supply voltage range from 1.4 V to 4.3 V
Very low ON resistance:
1.6 (typical) at VCC = 1.4 V 1.0 (typical) at VCC = 1.65 V 0.55 (typical) at VCC = 2.3 V 0.50 (typical) at VCC = 2.7 V 0.50 (typical) at VCC = 4.3 V
Break-before-make switching
High noise immunity
ESD protection: HBM JESD22-A114F Class 3A exceeds 7500 V MM JESD22-A115-A exceeds 200 V CDM AEC-Q100-011 revision B exceeds 1000 V IEC61000-4-2 contact discharge exceeds 8000 V for switch ports
CMOS low-power consumption
Latch-up performance exceeds 100 mA per JESD78 Class II Level A
Dire.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | NX3L1G3157-Q100 |
NXP |
Low-ohmic single-pole double-throw analog switch | |
2 | NX3L1G384 |
NXP |
Low-ohmic single-pole single-throw analog switch | |
3 | NX3L1G53 |
NXP |
Low-ohmic Single-pole Double-throw Analog Switch | |
4 | NX3L1G66 |
NXP Semiconductors |
Low-voltage analog switch | |
5 | NX3L1G66-Q100 |
NXP |
Low-ohmic single-pole single-throw analog switch | |
6 | NX3L1T3157 |
NXP Semiconductors |
Low-ohmic single-pole double-throw analog switch | |
7 | NX3L1T384 |
NXP |
Single-pole Single-throw Analog Switch | |
8 | NX3L1T5157 |
NXP Semiconductors |
Low-ohmic single-pole double-throw switch | |
9 | NX3L1T53 |
NXP |
Low-ohmic Single-pole Double-throw Analog Switch | |
10 | NX3L1T66 |
NXP |
Low-ohmic Single-pole Single-throw Analog Switch | |
11 | NX3L2267 |
NXP |
Low-ohmic dual single-pole double-throw analog switch | |
12 | NX3L2267S |
NXP |
Low-ohmic dual single-pole double-throw analog switch |