Transformers convert to the LO and RF paths to balanced lines connecting a low barrier, Schottky diode ring quad. These transformers help provide excellent isolation between ports. Conversion loss is low. The direct connection of the IF port to the diode quad allows these mixers to be used as phase detectors and bi-phase modulators. Pin Configuration Pin No.
n n n n FP-2 Usable down to 200 KHz Conversion Loss: 6.5 dB Typical Impedance: 50 Ohms Nominal Maximum Input Power: 300 mW max. @ 25°C, Derated to 85°C @ 3.2 mW/°C n IF Port Current: 50 mA Max. n MIL-STD-883 Screening Available Description Transformers convert to the LO and RF paths to balanced lines connecting a low barrier, Schottky diode ring quad. These transformers help provide excellent isolation between ports. Conversion loss is low. The direct connection of the IF port to the diode quad allows these mixers to be used as phase detectors and bi-phase modulators. Pin Configuration Pin.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | MD-123 |
MA-COM |
Double-Balanced Mixer | |
2 | MD-108 |
MA-COM |
Double-Balanced Mixer | |
3 | MD-113 |
Tyco |
High Performance Double-Balanced Mixer | |
4 | MD-140 |
MA-COM |
Double-Balanced Mixer | |
5 | MD-148 |
MA-COM |
Double-Balanced Mixer | |
6 | MD-149 |
MA-COM |
Double-Balanced Mixer | |
7 | MD-156 |
Tyco |
Flatpack Double-Balanced Mixer | |
8 | MD-158 |
Tyco |
Double-Balanced Mixer | |
9 | MD-160 |
MA-COM |
Termination Insensitive Mixer | |
10 | MD-161 |
MA-COM |
Termination Insensitive Mixer | |
11 | MD-169 |
Tyco |
Termination Insensitive Mixer | |
12 | MD-179 |
Tyco Electronics |
Termination Insensitive Mixer |