The unique design of the termination insensitive mixer (TIM) enables it to apply high reverse voltage to diodes during their “off” phase, in the LO cycle. This allows for higher power level performance with minimum distortion. In addition the TIM has internal loads that provide a good match and also absorb mixer generated LO frequency terms. Combined, these .
• Intermodulation Ratio is Insensitive to Port Mismatches
• VSWR: <2.0:1 Typical Midband
• Isolation: 35 dB Typical Midband
• Impedance: 50 Ohms Nominal
• Maximum Input Power: 350 mW Max @ 25°C, Derated to 85°C @ 3.2 mW/°C
• LO Power: +24 dBm Max.
• MIL-STD-883 Screening Available
MD-/MDC-/MDS-169 V5
FP-2 (MD-169)
Description
The unique design of the termination insensitive mixer (TIM) enables it to apply high reverse voltage to diodes during their “off” phase, in the LO cycle. This allows for higher power level performance with minimum distortion. In addition the TIM has internal loads that.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | MD-160 |
MA-COM |
Termination Insensitive Mixer | |
2 | MD-161 |
MA-COM |
Termination Insensitive Mixer | |
3 | MD-108 |
MA-COM |
Double-Balanced Mixer | |
4 | MD-113 |
Tyco |
High Performance Double-Balanced Mixer | |
5 | MD-123 |
MA-COM |
Double-Balanced Mixer | |
6 | MD-124 |
Tyco |
Double-Balanced Mixer | |
7 | MD-124 |
MA-COM |
Double-Balanced Mixer | |
8 | MD-140 |
MA-COM |
Double-Balanced Mixer | |
9 | MD-148 |
MA-COM |
Double-Balanced Mixer | |
10 | MD-149 |
MA-COM |
Double-Balanced Mixer | |
11 | MD-156 |
Tyco |
Flatpack Double-Balanced Mixer | |
12 | MD-158 |
Tyco |
Double-Balanced Mixer |