Transformers convert the LO and RF paths to balanced lines connecting to a low barrier, Schottky diode ring quad. These transformers help provide excellent isolation between ports. Conversion Loss is low. The direct connection of the IF port to the diode quad allows these mixers to be used as phase detectors and bi-phase modulators. RH-3 Rev. V4 Pin Confi.
Low Cost
Conversion Loss: 7 dB Typical
Impedance: 50 Ohms Nominal
Maximum Input Power: 400 mW max. @ 25°C,
Derated linearly to 85°C @ 3.2 mW/°C
IF Port Current: 50 mA Max.
MIL-STD-883 Screening Available
Description
Transformers convert the LO and RF paths to balanced lines connecting to a low barrier, Schottky diode ring quad. These transformers help provide excellent isolation between ports. Conversion Loss is low. The direct connection of the IF port to the diode quad allows these mixers to be used as phase detectors and bi-phase modulators.
RH-3
Rev. V4
Pin Configuration
Pi.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | MD-113 |
Tyco |
High Performance Double-Balanced Mixer | |
2 | MD-123 |
MA-COM |
Double-Balanced Mixer | |
3 | MD-124 |
Tyco |
Double-Balanced Mixer | |
4 | MD-124 |
MA-COM |
Double-Balanced Mixer | |
5 | MD-140 |
MA-COM |
Double-Balanced Mixer | |
6 | MD-148 |
MA-COM |
Double-Balanced Mixer | |
7 | MD-149 |
MA-COM |
Double-Balanced Mixer | |
8 | MD-156 |
Tyco |
Flatpack Double-Balanced Mixer | |
9 | MD-158 |
Tyco |
Double-Balanced Mixer | |
10 | MD-160 |
MA-COM |
Termination Insensitive Mixer | |
11 | MD-161 |
MA-COM |
Termination Insensitive Mixer | |
12 | MD-169 |
Tyco |
Termination Insensitive Mixer |