The unique design of the termination insensitive mixer (TIM) enables it to apply high reverse voltage to diodes during their ―off‖ phase, in the LO cycle. This allows for higher power level performance with minimum distortion. In addition the TIM has internal loads that provide a good match and also absorb mixer generated LO frequency terms. Combined, these .
Third Order Intermodulation Ratio is Insensitive to Port Mismatches
Conversion Loss: 6dB Typical Midband
DC Coupled IF Port
High Level Phase Detector
Impedance: 50 Ohms Nominal
Maximum Input Power: 350 mW Max @ 25°C,
Derated to 85°C @ 3.2 mW/°C
LO Power: +24 dBm Max.
IF Port Current: 50 mA Max.
MIL-STD-883 Screening Available
Description
The unique design of the termination insensitive mixer (TIM) enables it to apply high reverse voltage to diodes during their ―off‖ phase, in the LO cycle. This allows for higher power level performance with minimum distortion. In addition the.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | MD-160 |
MA-COM |
Termination Insensitive Mixer | |
2 | MD-169 |
Tyco |
Termination Insensitive Mixer | |
3 | MD-108 |
MA-COM |
Double-Balanced Mixer | |
4 | MD-113 |
Tyco |
High Performance Double-Balanced Mixer | |
5 | MD-123 |
MA-COM |
Double-Balanced Mixer | |
6 | MD-124 |
Tyco |
Double-Balanced Mixer | |
7 | MD-124 |
MA-COM |
Double-Balanced Mixer | |
8 | MD-140 |
MA-COM |
Double-Balanced Mixer | |
9 | MD-148 |
MA-COM |
Double-Balanced Mixer | |
10 | MD-149 |
MA-COM |
Double-Balanced Mixer | |
11 | MD-156 |
Tyco |
Flatpack Double-Balanced Mixer | |
12 | MD-158 |
Tyco |
Double-Balanced Mixer |