The unique design of the termination insensitive mixer (TIM) enables it to apply high reverse voltage to diodes during their “off” phase, in the LO cycle. This allows for higher power level performance with minimum distortion. In addition the TIM has internal loads that provide a good match and also absorb mixer generated LO frequency terms. Combined, these .
n Intermodulation Ratio is Insensitive to Port Mismatches n VSWR: <2.0:1 Typical Midband n Isolation: 35 dB Typical Midband n Impedance: 50 Ohms Nominal n Maximum Input Power: 350 mW Max @ 25°C, Derated n n V 3.00 MD-/MDC-179 FP-2 (MD-179) to 85°C @ 3.2 mW/°C LO Power: +24 dBm Max. MIL-STD-883 Screening Available Description The unique design of the termination insensitive mixer (TIM) enables it to apply high reverse voltage to diodes during their “off” phase, in the LO cycle. This allows for higher power level performance with minimum distortion. In addition the TIM has internal loads th.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | MD-108 |
MA-COM |
Double-Balanced Mixer | |
2 | MD-113 |
Tyco |
High Performance Double-Balanced Mixer | |
3 | MD-123 |
MA-COM |
Double-Balanced Mixer | |
4 | MD-124 |
Tyco |
Double-Balanced Mixer | |
5 | MD-124 |
MA-COM |
Double-Balanced Mixer | |
6 | MD-140 |
MA-COM |
Double-Balanced Mixer | |
7 | MD-148 |
MA-COM |
Double-Balanced Mixer | |
8 | MD-149 |
MA-COM |
Double-Balanced Mixer | |
9 | MD-156 |
Tyco |
Flatpack Double-Balanced Mixer | |
10 | MD-158 |
Tyco |
Double-Balanced Mixer | |
11 | MD-160 |
MA-COM |
Termination Insensitive Mixer | |
12 | MD-161 |
MA-COM |
Termination Insensitive Mixer |