The DRV5056 is a linear Hall effect sensor that responds proportionally to flux density of a magnetic south pole. The device can be used for accurate position sensing in a wide range of applications. Featuring a unipolar magnetic response, the analog output drives 0.6 V when no magnetic field is present, and increases when a south magnetic pole is applied. T.
•1 Unipolar linear hall effect magnetic sensor
• Operates from 3.3-V and 5-V power supplies
• Analog output with 0.6-V quiescent offset:
– Maximizes voltage swing for high accuracy
• Magnetic sensitivity options (at VCC = 5 V):
– A1: 200 mV/mT, 20-mT range
– A2: 100 mV/mT, 39-mT range
– A3: 50 mV/mT, 79-mT range
– A4: 25 mV/mT, 158-mT range
– A6: 100 mV/mT, 39-mT range
• Fast 20-kHz sensing bandwidth
• Low-noise output with ±1-mA drive
• Compensation for magnet temperature drift
• Standard industry packages:
– Surface-mount SOT-23
– Through-hole TO-92
2 Applications
• Precise position sensing .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | DRV5053 |
Texas Instruments |
Analog-Bipolar Hall Effect Sensor | |
2 | DRV5053-Q1 |
Texas Instruments |
Automotive Analog-Bipolar Hall Effect Sensor | |
3 | DRV5055 |
Texas Instruments |
Ratiometric Linear Hall Effect Sensor | |
4 | DRV5055-Q1 |
Texas Instruments |
Automotive Ratiometric Linear Hall Effect Sensor | |
5 | DRV5056-Q1 |
Texas Instruments |
Automotive Unipolar Ratiometric Linear Hall Effect Sensor | |
6 | DRV5057 |
Texas Instruments |
Linear Hall Effect Sensor | |
7 | DRV5011 |
Texas Instruments |
Digital-Latch Hall Effect Sensor | |
8 | DRV5012 |
Texas Instruments |
Ultra-Low-Power Digital-Latch Hall-Effect Sensor | |
9 | DRV5013 |
Texas Instruments |
Digital-Latch Hall Effect Sensor | |
10 | DRV5013-Q1 |
Texas Instruments |
Automotive Digital-Latch Hall Effect Sensor | |
11 | DRV5015 |
Texas Instruments |
Digital-Latch Hall Effect Sensor | |
12 | DRV5023 |
Texas Instruments |
Digital-Switch Hall Effect Sensor |