The DRV5056-Q1 is a linear Hall effect sensor that responds proportionally to flux density of a magnetic south pole. The device can be used for accurate position sensing in a wide range of applications. Featuring a unipolar magnetic response, the analog output drives 0.6 V when no magnetic field is present, and increases when a south magnetic pole is applied.
•1 Unipolar Linear Hall Effect Magnetic Sensor
• Operates From 3.3-V and 5-V Power Supplies
• Analog Output With 0.6-V Quiescent Offset:
– Maximizes Voltage Swing for High Accuracy
• Magnetic Sensitivity Options (At VCC = 5 V):
– A1: 200 mV/mT, 20-mT Range
– A2: 100 mV/mT, 39-mT Range
– A3: 50 mV/mT, 79-mT Range
– A4: 25 mV/mT, 158-mT Range
• Fast 20-kHz Sensing Bandwidth
• Low-Noise Output With ±1-mA Drive
• Compensation For Magnet Temperature Drift
• Qualified for Automotive Applications
• AEC-Q100 Qualified With the Following Results:
– Device Temperature Grade 0:
–40°C to 150°C
Ambient Ope.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | DRV5056 |
Texas Instruments |
unipolar ratiometric linear hall effect sensor | |
2 | DRV5053 |
Texas Instruments |
Analog-Bipolar Hall Effect Sensor | |
3 | DRV5053-Q1 |
Texas Instruments |
Automotive Analog-Bipolar Hall Effect Sensor | |
4 | DRV5055 |
Texas Instruments |
Ratiometric Linear Hall Effect Sensor | |
5 | DRV5055-Q1 |
Texas Instruments |
Automotive Ratiometric Linear Hall Effect Sensor | |
6 | DRV5057 |
Texas Instruments |
Linear Hall Effect Sensor | |
7 | DRV5011 |
Texas Instruments |
Digital-Latch Hall Effect Sensor | |
8 | DRV5012 |
Texas Instruments |
Ultra-Low-Power Digital-Latch Hall-Effect Sensor | |
9 | DRV5013 |
Texas Instruments |
Digital-Latch Hall Effect Sensor | |
10 | DRV5013-Q1 |
Texas Instruments |
Automotive Digital-Latch Hall Effect Sensor | |
11 | DRV5015 |
Texas Instruments |
Digital-Latch Hall Effect Sensor | |
12 | DRV5023 |
Texas Instruments |
Digital-Switch Hall Effect Sensor |