The DRV5023 device is a chopper-stabilized Hall Effect Sensor that offers a magnetic sensing solution with superior sensitivity stability over temperature and integrated protection features. When the applied magnetic flux density exceeds the BOP threshold, the DRV5023 open-drain output goes low. The output stays low until the field decreases to less than BRP.
•1 Digital Unipolar-Switch Hall Sensor
• Superior Temperature Stability
– Sensitivity ±10% Over Temperature
• Multiple Sensitivity Options (BOP / BRP):
– 3.5 / 2 mT (FA, see Figure 24)
– 6.9 / 3.2 mT (AJ, see Figure 24)
– 14.5 / 6 mT (BI, see Figure 24)
• Supports a Wide Voltage Range
– 2.5 to 38 V
– No External Regulator Required
• Wide Operating Temperature Range
– TA =
–40 to 125°C (Q, see Figure 24)
• Open Drain Output (30-mA Sink)
• Fast 35-µs Power-On Time
• Small Package and Footprint
– Surface Mount 3-Pin SOT-23 (DBZ)
– 2.92 mm × 2.37 mm
– Through-Hole 3-Pin TO-92 (LPG)
– 4.00 mm × 3.1.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | DRV5023-Q1 |
Texas Instruments |
Automotive Digital-Switch Hall Effect Sensor | |
2 | DRV5011 |
Texas Instruments |
Digital-Latch Hall Effect Sensor | |
3 | DRV5012 |
Texas Instruments |
Ultra-Low-Power Digital-Latch Hall-Effect Sensor | |
4 | DRV5013 |
Texas Instruments |
Digital-Latch Hall Effect Sensor | |
5 | DRV5013-Q1 |
Texas Instruments |
Automotive Digital-Latch Hall Effect Sensor | |
6 | DRV5015 |
Texas Instruments |
Digital-Latch Hall Effect Sensor | |
7 | DRV5032 |
Texas Instruments |
Ultra-Low-Power Digital-Switch Hall Effect Sensor | |
8 | DRV5033 |
Texas Instruments |
Digital-Omnipolar-Switch Hall Effect Sensor | |
9 | DRV5033-Q1 |
Texas Instruments |
Automotive Digital-Omnipolar-Switch Hall Effect Sensor | |
10 | DRV5053 |
Texas Instruments |
Analog-Bipolar Hall Effect Sensor | |
11 | DRV5053-Q1 |
Texas Instruments |
Automotive Analog-Bipolar Hall Effect Sensor | |
12 | DRV5055 |
Texas Instruments |
Ratiometric Linear Hall Effect Sensor |