The DRV5055 is a linear Hall effect sensor that responds proportionally to magnetic flux density. The device can be used for accurate position sensing in a wide range of applications. The device operates from 3.3-V or 5-V power supplies. When no magnetic field is present, the analog output drives half of VCC. The output changes linearly with the applied ma.
• Ratiometric Linear Hall Effect Magnetic Sensor
• Operates From 3.3-V and 5-V Power Supplies
• Analog Output With VCC / 2 Quiescent Offset
• Magnetic Sensitivity Options (At VCC = 5 V):
– A1/Z1: 100 mV/mT, ±21-mT Range
– A2/Z2: 50 mV/mT, ±42-mT Range
– A3/Z3: 25 mV/mT, ±85-mT Range
– A4/Z4: 12.5 mV/mT, ±169-mT Range
• Fast 20-kHz Sensing Bandwidth
• Low-Noise Output With ±1-mA Drive
• Compensation For Magnet Temperature Drift for A1/A2/A3/A4 Versions and None for Z1/Z2/Z3/Z4 Versions
• Standard Industry Packages:
– Surface-Mount SOT-23
– Through-Hole TO-92
2 Applications
• Precise Position Se.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | DRV5053 |
Texas Instruments |
Analog-Bipolar Hall Effect Sensor | |
2 | DRV5053-Q1 |
Texas Instruments |
Automotive Analog-Bipolar Hall Effect Sensor | |
3 | DRV5055-Q1 |
Texas Instruments |
Automotive Ratiometric Linear Hall Effect Sensor | |
4 | DRV5056 |
Texas Instruments |
unipolar ratiometric linear hall effect sensor | |
5 | DRV5056-Q1 |
Texas Instruments |
Automotive Unipolar Ratiometric Linear Hall Effect Sensor | |
6 | DRV5057 |
Texas Instruments |
Linear Hall Effect Sensor | |
7 | DRV5011 |
Texas Instruments |
Digital-Latch Hall Effect Sensor | |
8 | DRV5012 |
Texas Instruments |
Ultra-Low-Power Digital-Latch Hall-Effect Sensor | |
9 | DRV5013 |
Texas Instruments |
Digital-Latch Hall Effect Sensor | |
10 | DRV5013-Q1 |
Texas Instruments |
Automotive Digital-Latch Hall Effect Sensor | |
11 | DRV5015 |
Texas Instruments |
Digital-Latch Hall Effect Sensor | |
12 | DRV5023 |
Texas Instruments |
Digital-Switch Hall Effect Sensor |