PI3EQXDP1201 provides the ability to reduce signal jitter by transmission line effects to enable longer cable length on the 5.4Gbps DisplayPort1.2 signals. Integrated AUX decoder can support Displayport link training. It can decipher the link training message and automatically configure Displayport differential signal outputs with the best pre-emphasis and o.
ÎÎCompliant with VESA DisplayPort 1.2 specification for HBR2, HBR, RBR rate (5.4/2.7/1.62Gbps) ÎÎDual mode DisplayPort Outputs by providing DDC signals across the Aux sink pin ÎÎBuilt-in Aux interception circuit only listen to the link training, but does not affect link training ÎÎSink Request Auto Test Mode through Aux Channels ÎÎDynamic EQ through Aux configuration register programming for deterministic jitter reduction ÎÎCable Detection pins, toggle between DP and TMDS mode ÎÎAutomatic power down state when HPD signal is low ÎÎLow insertion loss across the Aux signal path ÎÎDedicated pin co.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | PI3EQX1001 |
Diodes |
1-Channel USB3.1 GEN-2 ReDriver | |
2 | PI3EQX10312 |
Diodes |
USB 3.1 Mux/Demux ReDriver | |
3 | PI3EQX10612 |
Diodes |
USB 3.1 Mux/Demux ReDriver | |
4 | PI3EQX1204-C |
Diodes |
12.5Gbps 4-channel SAS3 ReDriver | |
5 | PI3EQX2024 |
DIODES |
USB 3.2 Gen 2x2 ReDriver | |
6 | PI3EQX3811C |
Pericom Semiconductor Corporation |
1-Port SATA2 I/m ReDriver | |
7 | PI3EQX3851B |
Pericom Semiconductor Corporation |
1-port SATA2/SAS ReDriver | |
8 | PI3EQX4951B |
Pericom Semiconductor Corporation |
1-Port SATA2 I/m ReDriver | |
9 | PI3EQX6741ST |
Pericom Semiconductor Corporation |
SATA Gen 3i ReDriver | |
10 | PI3012A |
AMI SEMICONDUCTOR |
300DPI CIS Sensor Chip | |
11 | PI3033B |
AMI SEMICONDUCTOR |
Contact Image Sensor | |
12 | PI3034A |
AMI SEMICONDUCTOR |
200DPI CIS Sensor Chip |