Pericom Semiconductor’s PI3EQX3851B is a low power, signal ReDriver. The device provides programmable equalization, to optimize performance over a variety of physical mediums by reducing Inter-Symbol Interference. PI3EQX3851B supports two 100-Ohm Differential CML data I/O’s between the Protocol ASIC to a switch fabric, across a backplane, or to extend the si.
•
•
•
•
•
•
•
•
•
•
•
• SATA2 i, m; external SATA2 Two 3.0Gbps differential signal pairs Adjustable Receiver Equalization 100-Ohm Differential CML I/O’s Independent Analog output swing adjustment Independent Analog Output Emphasis Control Input signal level detect and squelch for each channel OOB Support Low Power (200mW per Channel) Stand-by Mode
– Power Down State VDD Operating Range: 3.3V Packaging: − 20-TQFN (3.5x 4.5mm, ZH) − 20-TQFN (4x 4mm, ZD)
Description
Pericom Semiconductor’s PI3EQX3851B is a low power, signal ReDriver. The device provides programmable equalization, to optimize per.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | PI3EQX3811C |
Pericom Semiconductor Corporation |
1-Port SATA2 I/m ReDriver | |
2 | PI3EQX1001 |
Diodes |
1-Channel USB3.1 GEN-2 ReDriver | |
3 | PI3EQX10312 |
Diodes |
USB 3.1 Mux/Demux ReDriver | |
4 | PI3EQX10612 |
Diodes |
USB 3.1 Mux/Demux ReDriver | |
5 | PI3EQX1204-C |
Diodes |
12.5Gbps 4-channel SAS3 ReDriver | |
6 | PI3EQX2024 |
DIODES |
USB 3.2 Gen 2x2 ReDriver | |
7 | PI3EQX4951B |
Pericom Semiconductor Corporation |
1-Port SATA2 I/m ReDriver | |
8 | PI3EQX6741ST |
Pericom Semiconductor Corporation |
SATA Gen 3i ReDriver | |
9 | PI3EQXDP1201 |
Pericom Semiconductor |
3.3V 4-Ch DisplayPort 1.2 Redriver | |
10 | PI3012A |
AMI SEMICONDUCTOR |
300DPI CIS Sensor Chip | |
11 | PI3033B |
AMI SEMICONDUCTOR |
Contact Image Sensor | |
12 | PI3034A |
AMI SEMICONDUCTOR |
200DPI CIS Sensor Chip |