Peripheral Imaging Corporation PI3012A CIS sensor chip is a 300 dot per inch resolution linear array image sensor chip which utilizes PIC’s proprietary CMOS Image Sensing Technology. This image sensor is to be used for butting end-to-end on a printed circuit board (PCB) using chip-on-board technology to form a scanning array with various lengths. Applicatio.
spacing is approximately 84.6 µm. The size of each chip without scribe lines is 8080 µm by 380 µm. Each sensor chip has 6 bonding pads. The pad symbols and functions are described in Table 1. PAGE 1 of 7 PI3012A6, 6/9/99 www.DataSheet4U.com SYMBOL SP CP VDD DGND IOUT EOS FUNCTION Start Pulse: Input to start the line scan. Clock Pulse: Input to clock the Shift Register. Positive Supply: +5 volt supply connected to substrate. Digital Ground: Connection topside common. Signal Current Output: Output for video signal current End of Scan Pulse: Output from the shift register at end of scan. Tabl.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | PI3033B |
AMI SEMICONDUCTOR |
Contact Image Sensor | |
2 | PI3034A |
AMI SEMICONDUCTOR |
200DPI CIS Sensor Chip | |
3 | PI3039 |
AMI SEMICONDUCTOR |
600DPI CIS Image Sensor Chip | |
4 | PI3041A |
AMI SEMICONDUCTOR |
Contact Image Sensor 300DPI CIS Sensor Chip | |
5 | PI3042A |
AMI SEMICONDUCTOR |
Contact Image Sensor Chip | |
6 | PI3301-00 |
VICOR |
ZVS Switching Regulators | |
7 | PI3301-00-LGIZ |
Picor |
8V to 36Vin Cool-Power ZVS Buck Regulator | |
8 | PI3301-01 |
VICOR |
ZVS Switching Regulators | |
9 | PI3301-01-LGIZ |
Picor |
8V to 36Vin Cool-Power ZVS Buck Regulator | |
10 | PI3301-20 |
VICOR |
ZVS Switching Regulators | |
11 | PI3301-20-LGIZ |
Picor |
8V to 36Vin Cool-Power ZVS Buck Regulator | |
12 | PI3301-21 |
VICOR |
ZVS Switching Regulators |