The PCA9544A is a 4-channel, bidirectional translating multiplexer controlled via the I2C bus. The SCL/SDA upstream pair fans out to four downstream pairs, or channels. One SCL/SDA pair can be selected at a time, and this is determined by the contents of the programmable control register. Four interrupt inputs (INT3–INT0), one for each of the downstream pair.
•1 1-of-4 Bidirectional translating switches
• I2C Bus and SMBus compatible
• Four active-low interrupt inputs
• Active-low interrupt output
• Three address pins, allowing up to eight devices
on the I2C Bus
• Channel selection via I2C Bus
• Power up with all switch channels deselected
• Low RON switches
• Allows voltage-level translation between 1.8-V,
2.5-V, 3.3-V, and 5-V Buses
• No glitch on power up
• Supports hot insertion
• Low standby current
• Operating power-supply voltage range of
2.3 V to 5.5 V
• 5.5-V Tolerant inputs
• 0 to 400-kHz Clock frequency
• Latch-up performance exceeds 100.
The PCA9544A is a 1-of-4 bidirectional translating multiplexer, controlled via the I2C-bus. The SCL/SDA upstream pair fa.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | PCA9544 |
NXP |
4-channel I2C multiplexer and interrupt controller | |
2 | PCA9544ABS |
NXP |
4-channel I2C-bus multiplexer | |
3 | PCA9544AD |
NXP |
4-channel I2C-bus multiplexer | |
4 | PCA9544APW |
NXP |
4-channel I2C-bus multiplexer | |
5 | PCA9540 |
NXP |
2-channel I2C multiplexer | |
6 | PCA9540B |
NXP |
2-channel I2C-bus multiplexer | |
7 | PCA9541 |
NXP Semiconductors |
2-to-1 I2C-bus master selector | |
8 | PCA9541A |
NXP Semiconductors |
2-to-1 I2C-bus master selector | |
9 | PCA9542 |
NXP |
2-channel I2C multiplexer and interrupt controller | |
10 | PCA9542A |
NXP Semiconductors |
2-channel I2C-bus multiplexer and interrupt logic | |
11 | PCA9543 |
NXP |
2-channel I2C switch | |
12 | PCA9543A |
Texas Instruments |
2-Channel I2C Bus Switch |