The PCA9543 is a bi-directional translating switch, controlled by the I2C-bus. The SCL/SDA upstream pair fans out to two downstream pairs, or channels. Any individual SCx/SDx channels or combination of channels can be selected, determined by the contents of the programmable control register. Two interrupt inputs, INT0 to INT3, one for each of the downstream .
• 1-of-2 bi-directional translating switches
• I2C interface logic; compatible with SMBus standards
• 2 Active LOW Interrupt Inputs
• Active LOW Interrupt Output
• Active LOW Reset Input
• 2 address pins allowing up to 4 devices on the I2C-bus
• Channel selection via I2C-bus, in any combination
• Power up with all switch channels deselected
• Low RdsON switches
• Allows voltage level translation between 1.8 V, 2.5 V, 3.3 V and
• No glitch on power-up
• Supports hot insertion
• Low stand-by current
• Operating power supply voltage range of 2.3 V to 5.5 V
• 5 V tolerant Inputs
• 0 kHz to 400 kH.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | PCA9540 |
NXP |
2-channel I2C multiplexer | |
2 | PCA9540B |
NXP |
2-channel I2C-bus multiplexer | |
3 | PCA9541 |
NXP Semiconductors |
2-to-1 I2C-bus master selector | |
4 | PCA9541A |
NXP Semiconductors |
2-to-1 I2C-bus master selector | |
5 | PCA9542 |
NXP |
2-channel I2C multiplexer and interrupt controller | |
6 | PCA9542A |
NXP Semiconductors |
2-channel I2C-bus multiplexer and interrupt logic | |
7 | PCA9543A |
Texas Instruments |
2-Channel I2C Bus Switch | |
8 | PCA9543A |
NXP Semiconductors |
2-channel I2C-bus switch | |
9 | PCA9543B |
NXP Semiconductors |
2-channel I2C-bus switch | |
10 | PCA9543C |
NXP Semiconductors |
2-channel I2C-bus switch | |
11 | PCA9544 |
NXP |
4-channel I2C multiplexer and interrupt controller | |
12 | PCA9544A |
NXP |
4-channel I2C-bus multiplexer |