The PCA9543A is a dual bidirectional translating switch controlled by the I2C bus. The SCL/SDA upstream pair fans out to two downstream pairs, or channels. Either individual SCn/SDn channel or both channels can be selected, determined by the contents of the programmable control register. Two interrupt inputs (INT1–INT0), one for each of the downstream pairs,.
•1 1-of-2 Bidirectional Translating Switches
• I2C Bus and SMBus Compatible
• Two Active-Low Interrupt Inputs
• Active-Low Interrupt Output
• Active-Low Reset Input
• Two Address Pins Allowing up to Four PCA9543A
Devices on the I2C Bus
• Channel Selection Via I2C Bus, in Any
Combination
• Power-up With All Switch Channels Deselected
• Low RON Switches
• Allows Voltage-Level Translation Between
1.8-V, 2.5-V, 3.3-V, and 5-V Buses
• No Glitch on Power-up
• Supports Hot Insertion
• Low Standby Current
• Operating Power-Supply Voltage Range of 2.3 V
to 5.5 V
• 5.5-V Tolerant Inputs
• 0 to 400-kHz C.
The PCA9543A/43B/43C is a bidirectional translating switch, controlled by the I2C-bus. The SCL/SDA upstream pair fans ou.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | PCA9543 |
NXP |
2-channel I2C switch | |
2 | PCA9543B |
NXP Semiconductors |
2-channel I2C-bus switch | |
3 | PCA9543C |
NXP Semiconductors |
2-channel I2C-bus switch | |
4 | PCA9540 |
NXP |
2-channel I2C multiplexer | |
5 | PCA9540B |
NXP |
2-channel I2C-bus multiplexer | |
6 | PCA9541 |
NXP Semiconductors |
2-to-1 I2C-bus master selector | |
7 | PCA9541A |
NXP Semiconductors |
2-to-1 I2C-bus master selector | |
8 | PCA9542 |
NXP |
2-channel I2C multiplexer and interrupt controller | |
9 | PCA9542A |
NXP Semiconductors |
2-channel I2C-bus multiplexer and interrupt logic | |
10 | PCA9544 |
NXP |
4-channel I2C multiplexer and interrupt controller | |
11 | PCA9544A |
NXP |
4-channel I2C-bus multiplexer | |
12 | PCA9544A |
Texas Instruments |
Low Voltage 4-Channel I2C and SMBus Multiplexer |