The PCA9544A is a 1-of-4 bidirectional translating multiplexer, controlled via the I2C-bus. The SCL/SDA upstream pair fans out to four SCx/SDx downstream pairs, or channels. Only one SCx/SDx channel is selected at a time, determined by the contents of the programmable control register. Four interrupt inputs, INT0 to INT3, one for each of the SCx/SDx downstre.
1-of-4 bidirectional translating multiplexer
I2C-bus interface logic; compatible with SMBus
4 active LOW interrupt inputs
Active LOW interrupt output
3 address pins allowing up to 8 devices on the I2C-bus
Channel selection via I2C-bus
Power-up with all multiplexer channels deselected
Low Ron switches
Allows voltage level translation between 1.8 V, 2.5 V, 3.3 V and 5 V buses
No glitch on power-up
Supports hot insertion
Low standby current
Operating power supply voltage range of 2.3 V to 5.5 V
5 V tolerant Inputs
0 Hz to 400 kHz clock frequency
ESD protection exce.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | PCA9544A |
NXP |
4-channel I2C-bus multiplexer | |
2 | PCA9544A |
Texas Instruments |
Low Voltage 4-Channel I2C and SMBus Multiplexer | |
3 | PCA9544ABS |
NXP |
4-channel I2C-bus multiplexer | |
4 | PCA9544APW |
NXP |
4-channel I2C-bus multiplexer | |
5 | PCA9544 |
NXP |
4-channel I2C multiplexer and interrupt controller | |
6 | PCA9540 |
NXP |
2-channel I2C multiplexer | |
7 | PCA9540B |
NXP |
2-channel I2C-bus multiplexer | |
8 | PCA9541 |
NXP Semiconductors |
2-to-1 I2C-bus master selector | |
9 | PCA9541A |
NXP Semiconductors |
2-to-1 I2C-bus master selector | |
10 | PCA9542 |
NXP |
2-channel I2C multiplexer and interrupt controller | |
11 | PCA9542A |
NXP Semiconductors |
2-channel I2C-bus multiplexer and interrupt logic | |
12 | PCA9543 |
NXP |
2-channel I2C switch |