The PCA9513A and PCA9514A are hot swappable I2C-bus and SMBus buffers that allow I/O card insertion into a live backplane without corrupting the data and clock buses. Control circuitry prevents the backplane from being connected to the card until a stop command or bus idle occurs on the backplane without bus contention on the card. When the connection is mad.
I Bidirectional buffer for SDA and SCL lines increases fan-out and prevents SDA and SCL corruption during live board insertion and removal from multipoint backplane systems I Compatible with I2C-bus Standard mode, I2C-bus Fast mode, and SMBus standards I Built-in ∆V/∆t rise time accelerators on all SDA and SCL lines (0.8 V threshold) requires the bus pull-up voltage and supply voltage (VCC) to be the same I Rise time accelerator threshold moved from 0.6 V to 0.8 V for improved noise margin I Active HIGH ENABLE input I Active HIGH READY open-drain output I High-impedance SDAn and SCLn pins for .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | PCA9513 |
Philips |
Hot swappable I2C and SMBus bus buffer | |
2 | PCA9510 |
NXP |
Hot swappable I2C and SMBus bus buffer | |
3 | PCA9510A |
NXP Semiconductors |
Hot swappable I2C-bus and SMBus bus buffer | |
4 | PCA9511 |
NXP |
Hot swappable I2C and SMBus bus buffer | |
5 | PCA9511A |
NXP Semiconductors |
Hot swappable I2C-bus and SMBus bus buffer | |
6 | PCA9512 |
NXP |
Level shifting hot swappable I2C and SMBus buffer | |
7 | PCA9512A |
NXP |
Level shifting hot swappable I2C-bus and SMBus bus buffer | |
8 | PCA9512B |
NXP |
Level shifting hot swappable I2C-bus and SMBus bus buffer | |
9 | PCA9514 |
Philips |
Hot swappable I2C and SMBus bus buffer | |
10 | PCA9514A |
NXP Semiconductors |
Hot swappable I2C-bus and SMBus bus buffer | |
11 | PCA9515 |
NXP |
I2C-bus repeater | |
12 | PCA9515A |
NXP |
I2C-bus repeater |