The NX2411 is a three-phase PWM controller with integrated FET driver designed to provide a low cost high current multiphase converter that meets the VRD10.0 specification. Multiphase synchronous buck converter offers ripple cancelation for both input and output.The NX2411 uses differential remote sensing using either current sense resistor or inductor DCR s.
Differential inductor DCR sensing eliminates the problem with layout parasitic External programmable voltage droop VRM 9 and 10 compatible 6 bit VID On the Fly DAC changes allows smooth transition Internal Digital Soft Start Low Impedance On-board Drivers Power Good Signal for Power Sequencing Over voltage protection with latch function Enable Signal allows external shutdown as well as programming the BUS voltage start up threshold APPLICATIONS VRD10.X Desktop mother board Low voltage high current applications TYPICAL APPLICATION +5V 1k 10 +12V 5.11k 12k 1uF 48 EN 47 ENBUS 1uF 2 VCC 20.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | NX2415 |
star |
DOT MATRIX PRINTER MANUAL | |
2 | NX2415 |
NEXSEM |
TWO PHASE SYNCHRONOUS PWM CONTROLLER | |
3 | NX2415II |
star |
DOT MATRIX PRINTER MANUAL | |
4 | NX2422 |
Microsemi |
TWO PHASE SYNCHRONOUS PWM CONTROLLER | |
5 | NX2016SF |
NDK |
Crystal Units | |
6 | NX2020N2 |
NXP |
N-channel Trench MOSFET | |
7 | NX2020P1 |
NXP |
single P-channel Trench MOSFET | |
8 | NX20P0407 |
NXP |
CC and SBU Protection | |
9 | NX20P0408 |
NXP |
USB D+/D- protection | |
10 | NX20P0477 |
NXP |
USB Type-C CC smart protection | |
11 | NX20P3483UK |
NXP |
high voltage sink/source combo switch | |
12 | NX20P5090 |
NXP |
High voltage USB PD power switch |