NX20P0408 is a single chip USB data lines protection solution that provides 28V shortto-VBUS protection to system side D+ and D- pins located near VBUS pins. USB Type-C allows VBUS voltage to increase up to 20V through Power delivery protocol. D+ and D- pins can be shorted to VBUS due to mechanical twisting and sliding of the connector since Type-C connector.
• USB Type-C D+/D- short protection to VBUS
– CON_DP / CON_DN : 28VDC
• Low Rdson switch : 4Ω
• High switch bandwidth = 1.5GHz
• 35V surge protection on CON_DP/CON_DN
• Fast OVP turn off time : 60ns
• Post-stage clamp circuit to clamp voltage until switch is off.
3 Applications
• Smartphone
• Tablet
• Laptop
NXP Semiconductors
NX20P0408
USB D+/D- protection IC
4 Ordering information
Table 1. Ordering information
Type number
Topside marking
NX20P0408UK N08
Package Name WLCSP12
Description
Version
Wafer level chip-scale package, 12 bumps; 1.67 SOT1390-7 mm x 1.27 mm x 0.525 mm body (b.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | NX20P0407 |
NXP |
CC and SBU Protection | |
2 | NX20P0477 |
NXP |
USB Type-C CC smart protection | |
3 | NX20P3483UK |
NXP |
high voltage sink/source combo switch | |
4 | NX20P5090 |
NXP |
High voltage USB PD power switch | |
5 | NX2016SF |
NDK |
Crystal Units | |
6 | NX2020N2 |
NXP |
N-channel Trench MOSFET | |
7 | NX2020P1 |
NXP |
single P-channel Trench MOSFET | |
8 | NX2113 |
Microsemi |
300kHz & 600kHz SYNCHRONOUS PWM CONTROLLER | |
9 | NX2113A |
Microsemi |
300kHz & 600kHz SYNCHRONOUS PWM CONTROLLER | |
10 | NX2114 |
Microsemi |
300kHz & 600kHz SYNCHRONOUS PWM CONTROLLER | |
11 | NX2114 |
NEXSEM |
300kHz & 600kHz SYNCHRONOUS PWM CONTROLLER | |
12 | NX2114A |
Microsemi |
300kHz & 600kHz SYNCHRONOUS PWM CONTROLLER |