The NX20P3483UK is a product with combined multiple power switches and an LDO for USB PD application. The device includes a bidirectional high voltage power switch which supports both 20V sink and 6V source; a 5V power switch for source and a 100mA LDO provides power supply for dead battery operation. The high voltage power switch has 29V DC tolerance, and i.
Wide supply voltage range for VBUS from 2.8V to 20V
System power supply V5V from 4.0V to 5.5V
Chip power supply VDD from 2.7V to 5.5V
VBUS to VCHG Switch
28m(typical) ultra low ON resistance ISW maximum 5A continuous current Bidirectional operation: 20V sink switch from VBUS to VCHG with RCP and 6V
source switch from VCHG to VBUS with overcurrent limit Adjustable overcurrent limit for source configuration from 400mA to 3.4A by
I2C-bus interface
V5V to VBUS switch
38m(typical) ultra low ON resistance
NXP Semiconductors
NX20P3483UK
USB PD and Type-C high voltage sink/so.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | NX20P0407 |
NXP |
CC and SBU Protection | |
2 | NX20P0408 |
NXP |
USB D+/D- protection | |
3 | NX20P0477 |
NXP |
USB Type-C CC smart protection | |
4 | NX20P5090 |
NXP |
High voltage USB PD power switch | |
5 | NX2016SF |
NDK |
Crystal Units | |
6 | NX2020N2 |
NXP |
N-channel Trench MOSFET | |
7 | NX2020P1 |
NXP |
single P-channel Trench MOSFET | |
8 | NX2113 |
Microsemi |
300kHz & 600kHz SYNCHRONOUS PWM CONTROLLER | |
9 | NX2113A |
Microsemi |
300kHz & 600kHz SYNCHRONOUS PWM CONTROLLER | |
10 | NX2114 |
Microsemi |
300kHz & 600kHz SYNCHRONOUS PWM CONTROLLER | |
11 | NX2114 |
NEXSEM |
300kHz & 600kHz SYNCHRONOUS PWM CONTROLLER | |
12 | NX2114A |
Microsemi |
300kHz & 600kHz SYNCHRONOUS PWM CONTROLLER |