Signal CS Name Chip Select I/O I Description A low level selects the device and a high level puts the device in standby mode. If CS is brought high during a program cycle, the cycle will complete and then the device will enter standby mode. When CS is high, SO is in high-Z. CS must be driven low after power-up prior to any sequence being started. Synchroniz.
• Power Supply Options 1.8V to 3.6V
• Very low standby current As low as 200nA
• Very low operating current As low as 500uA
• Simple memory control Single chip select (CS) Serial input (SI) and serial output (SO)
• Flexible operating modes Word read and write Page mode (32 word page) Burst mode (full array)
• Organization 8K x 8 bit
• Self timed write cycles
• Built-in write protection (CS high)
• HOLD pin for pausing communication
• High reliability Unlimited write cycles
• RoHS Compliant Packages Green SOIC and TSSOP
Device Options
Part Number N64S0818HDA N64S0830HDA Density 64Kb Power Supp.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | N64S0818HDA |
AMI SEMICONDUCTOR |
(N64S0818HDA / N64S0830HDA) 64Kb Low Power Serial SRAMs | |
2 | N64S818HA |
ON Semiconductor |
64 kb Low Power Serial SRAMs | |
3 | N64S830HA |
ON Semiconductor |
64 kb Low Power Serial SRAMs | |
4 | N64T1630C1B |
NanoAmp Solutions |
64Mb Ultra-Low Power Asynchronous CMOS PSRAM | |
5 | N6006NZ |
Renesas |
N-channel MOSFET | |
6 | N6012ZD020 |
IXYS |
Phase Control Thyristor | |
7 | N6012ZD040 |
IXYS |
Phase Control Thyristor | |
8 | N6012ZD060 |
IXYS |
Phase Control Thyristor | |
9 | N6171A |
Agilent(Hewlett-Packard) |
MATLAB Data Analysis Software | |
10 | N6200 |
NIKO-SEM |
Step-Down Converter | |
11 | N620CH |
YZPST |
HIGH POWER THYRISTOR | |
12 | N630CH42 |
YZPST |
HIGH POWER THYRISTOR |