The DS28E18 is a simple communications bridge that resides at a remote SPI or I2C sensor and allows the sensor to be controlled by just two wires coming from the host system. It reduces the wire count from six (for SPI) or four (for I2C). These two wires use Maxim’s 1-Wire protocol that combines power and signal on a single wire, and which is driven by the p.
● Operate Remote I2C or SPI Devices Using SingleContact 1-Wire Interface
• Extending I2C/SPI Communication Distance
• Reduce Six Wires (for SPI) or Four Wires (for I2C) to Two Wires
• 512-Byte Sequencer for Autonomous Operation of Attached Devices
• Two Configurable GPIO Pins for Additional Peripheral Control
● No External Power Required
• DS28E18 Parasitically Powered from 1-Wire
• I2C/SPI Peripheral Power Derived from the 1-Wire Line
● Flexible 1-Wire and I2C/SPI Master Operational Modes
• Supports Standard (11kbps) and Overdrive (90kbps) 1-Wire Communication
• 100kHz, 400kHz, and 1MHz for I.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | DS28E10 |
Maxim Integrated Products |
1-Wire SHA-1 Authenticator | |
2 | DS28E15 |
Maxim Integrated |
DeepCover Secure Authenticator | |
3 | DS28E16 |
Maxim Integrated |
1-Wire Secure SHA-3 Authenticator | |
4 | DS28E17 |
Maxim Integrated |
1-Wire-to-I2C Master Bridge | |
5 | DS28E17 |
Analog Devices |
1-Wire-to-I2C Controller Bridge | |
6 | DS28E01-100 |
Maxim Integrated |
1Kb Protected 1-Wire EEPROM | |
7 | DS28E02 |
Maxim Integrated Products |
1-Wire SHA-1 Authenticator 1Kb EEPROM | |
8 | DS28E04-100 |
Maxim Integrated |
4096-Bit Addressable 1-Wire EEPROM | |
9 | DS28E05 |
Maxim Integrated |
1-Wire EEPROM | |
10 | DS28E07 |
Analog Devices |
1-Wire EEPROM | |
11 | DS28E22 |
Maxim Integrated |
DeepCover Secure Authenticator | |
12 | DS28E25 |
Maxim Integrated Products |
DeepCover Secure Authenticator |