The DS28E07 is a 1024-bit, 1-Wire® EEPROM chip organized as four memory pages of 256 bits each. Data is written to an 8-byte scratchpad, verified, and then copied to the EEPROM memory. As a special feature, the four user memory pages can individually be write protected or put in EPROM-emulation mode, where bits can only be changed from a 1 to a 0 state. Each.
● Partitioning of Memory Provides Greater Flexibility in Programming User Data
• 1024 Bits of EEPROM Memory Organized as Four Pages of 256 Bits
• Individual Memory Pages Can Be Permanently Write Protected or Put in EPROM-Emulation Mode (Write to 0)
● Advanced 1-Wire Protocol Minimizes Interface to Just Single IO Reducing Required Pin Count and Enhancing Reliability
• Unique Factory-Programmed, Unalterable 64-Bit Identification Number
• Switchpoint Hysteresis and Filtering to Optimize Performance in the Presence of Noise
• Communicates to Host with a Single Digital Signal at 15.4kbps or 125kbps.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | DS28E01-100 |
Maxim Integrated |
1Kb Protected 1-Wire EEPROM | |
2 | DS28E02 |
Maxim Integrated Products |
1-Wire SHA-1 Authenticator 1Kb EEPROM | |
3 | DS28E04-100 |
Maxim Integrated |
4096-Bit Addressable 1-Wire EEPROM | |
4 | DS28E05 |
Maxim Integrated |
1-Wire EEPROM | |
5 | DS28E10 |
Maxim Integrated Products |
1-Wire SHA-1 Authenticator | |
6 | DS28E15 |
Maxim Integrated |
DeepCover Secure Authenticator | |
7 | DS28E16 |
Maxim Integrated |
1-Wire Secure SHA-3 Authenticator | |
8 | DS28E17 |
Maxim Integrated |
1-Wire-to-I2C Master Bridge | |
9 | DS28E17 |
Analog Devices |
1-Wire-to-I2C Controller Bridge | |
10 | DS28E18 |
Maxim Integrated |
1-Wire to I2C/SPI Bridge | |
11 | DS28E22 |
Maxim Integrated |
DeepCover Secure Authenticator | |
12 | DS28E25 |
Maxim Integrated Products |
DeepCover Secure Authenticator |