The DS28E05 is a 112-byte user-programmable EEPROM organized as 7 pages of 16 bytes each. Memory pages can be individually set to write protected or EPROM emulation mode through protection byte settings. Each part has its own guaranteed unique 64-bit ROM identification number (ROM ID) that is factory programmed into the chip. The DS28E05 communicates over Ma.
● Single-Contact 1-Wire Interface
● 112 Bytes User EEPROM with 1K Write Cycles
● Programmable Write Protection and OTP EPROM
Emulation Modes for User Memory
● Unique Factory-Programmed 64-Bit ROM ID Number
● Communicates with Host at Up to 76.9kbps
(Overdrive Only)
● Operating Range: 1.71V to 3.63V, -40°C to +85°C
● ±8kV HBM ESD Protection (typ) on IO Pin
● 4-Ball UCSP, 2-Pad SFN, 3-Pin SOT23 and 6-Pin
TSOC Packages
Ordering Information appears at end of data sheet.
Typical Application Circuit
VCC
100kΩ
Q1
VCC
1kΩ
PIOX
µC
*PMV65XP
PIOY GND
BIDIRECTIONAL OPEN DRAIN PORT
RPUP
DS28E05.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | DS28E01-100 |
Maxim Integrated |
1Kb Protected 1-Wire EEPROM | |
2 | DS28E02 |
Maxim Integrated Products |
1-Wire SHA-1 Authenticator 1Kb EEPROM | |
3 | DS28E04-100 |
Maxim Integrated |
4096-Bit Addressable 1-Wire EEPROM | |
4 | DS28E07 |
Analog Devices |
1-Wire EEPROM | |
5 | DS28E10 |
Maxim Integrated Products |
1-Wire SHA-1 Authenticator | |
6 | DS28E15 |
Maxim Integrated |
DeepCover Secure Authenticator | |
7 | DS28E16 |
Maxim Integrated |
1-Wire Secure SHA-3 Authenticator | |
8 | DS28E17 |
Maxim Integrated |
1-Wire-to-I2C Master Bridge | |
9 | DS28E17 |
Analog Devices |
1-Wire-to-I2C Controller Bridge | |
10 | DS28E18 |
Maxim Integrated |
1-Wire to I2C/SPI Bridge | |
11 | DS28E22 |
Maxim Integrated |
DeepCover Secure Authenticator | |
12 | DS28E25 |
Maxim Integrated Products |
DeepCover Secure Authenticator |