The DRV5033 device is a chopper-stabilized Hall Effect Sensor that offers a magnetic sensing solution with superior sensitivity stability over temperature and integrated protection features. The DRV5033 responds the same to both polarities of magnetic field direction. When the applied magnetic flux density exceeds the BOP threshold, the DRV5033 open-drain ou.
•1 Digital Omnipolar-Switch Hall Sensor
• Superior Temperature Stability
– BOP ±10% Over Temperature
• Multiple Sensitivity Options (BOP / BRP):
– ±3.5 / ±2 mT (FA, see Device Nomenclature)
– ±6.9 / ±3.5 mT (AJ, see Device Nomenclature)
• Detects North and South Magnetic Field
• Supports a Wide Voltage Range
– 2.5 to 38 V
– No External Regulator Required
• Wide Operating Temperature Range
– TA =
–40 to 125°C (Q, see Device
Nomenclature)
• Open Drain Output (30-mA Sink)
• Fast 35-µs Power-On Time
• Small Package and Footprint
– Surface Mount 3-Pin SOT-23 (DBZ)
– 2.92 mm × 2.37 mm
– Through-Hole.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | DRV5032 |
Texas Instruments |
Ultra-Low-Power Digital-Switch Hall Effect Sensor | |
2 | DRV5033-Q1 |
Texas Instruments |
Automotive Digital-Omnipolar-Switch Hall Effect Sensor | |
3 | DRV5011 |
Texas Instruments |
Digital-Latch Hall Effect Sensor | |
4 | DRV5012 |
Texas Instruments |
Ultra-Low-Power Digital-Latch Hall-Effect Sensor | |
5 | DRV5013 |
Texas Instruments |
Digital-Latch Hall Effect Sensor | |
6 | DRV5013-Q1 |
Texas Instruments |
Automotive Digital-Latch Hall Effect Sensor | |
7 | DRV5015 |
Texas Instruments |
Digital-Latch Hall Effect Sensor | |
8 | DRV5023 |
Texas Instruments |
Digital-Switch Hall Effect Sensor | |
9 | DRV5023-Q1 |
Texas Instruments |
Automotive Digital-Switch Hall Effect Sensor | |
10 | DRV5053 |
Texas Instruments |
Analog-Bipolar Hall Effect Sensor | |
11 | DRV5053-Q1 |
Texas Instruments |
Automotive Analog-Bipolar Hall Effect Sensor | |
12 | DRV5055 |
Texas Instruments |
Ratiometric Linear Hall Effect Sensor |