The CDCVF2510 is a high-performance, low-skew, low-jitter, phase-lock loop (PLL) clock driver. It uses a phase-lock loop (PLL) to precisely align, in both frequency and phase, the feedback (FBOUT) output to the clock (CLK) input signal. It is specifically designed for use with synchronous DRAMs. The CDCVF2510 operates at a 3.3-V VCC. It also provides integra.
• Designed to Meet and Exceed PC133 SDRAM Registered DIMM Specification Rev. 1.1
• Spread Spectrum Clock Compatible
• Operating Frequency 50 MHz to 175 MHz
• Static Phase Error Distribution at 66 MHz to
166 MHz Is ±125 ps
• Jitter (cyc - cyc) at 66 MHz to 166 MHz Is |70| ps
• Advanced Deep Submicron Process Results in More Than 40% Lower Power Consumption Versus Current Generation PC133 Devices
• Available in Plastic 24-Pin TSSOP
• Phase-Lock Loop Clock Distribution for
Synchronous DRAM Applications
• Distributes One Clock Input to One Bank of 10 Outputs
• External Feedback (FBIN) Terminal Is .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | CDCVF2510A |
Texas Instruments |
3.3-V PHASE-LOCK LOOP CLOCK DRIVER | |
2 | CDCVF2505 |
Texas Instruments |
3.3-V Clock Phase-Lock Loop Clock Driver | |
3 | CDCVF2505-Q1 |
Texas Instruments |
3.3-V CLOCK PHASE-LOCKED LOOP CLOCK DRIVER | |
4 | CDCVF25081 |
Texas Instruments |
3.3-V Phased-Lock Loop Clock Driver | |
5 | CDCVF25084 |
Texas Instruments |
3.3-V 1:8 ZERO DELAY x4 CLOCK MULTIPLIER | |
6 | CDCVF2509 |
Texas Instruments |
3.3-V PHASE-LOCK LOOP CLOCK DRIVER | |
7 | CDCVF2509A |
Texas Instruments |
3.3-V PHASE-LOCK LOOP CLOCK DRIVER | |
8 | CDCVF2310 |
Texas Instruments |
2.5-V to 3.3-V High-Performance Clock Buffer | |
9 | CDCVF2310-EP |
Texas Instruments |
2.5-V TO 3.3-V HIGH-PERFORMANCE CLOCK BUFFER | |
10 | CDCVF111 |
Texas Instruments |
1:9 DIFFERENTIAL LVPECL CLOCK DRIVER | |
11 | CDCVF310 |
Texas Instruments |
2.5-V TO 3.3-V HIGH-PERFORMANCE CLOCK BUFFER | |
12 | CDCVF855 |
Texas Instruments |
2.5-V PHASE-LOCKED-LOOP CLOCK DRIVER |