This 8-bit flip-flop features 3-state outputs designed specifically for driving highly-capacitive or relatively low-impedance loads. It is particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers. The eight flip-flops of the 74ACT11374 are edge-triggered D-type flip-flops. On the positive transition.
3-state outputs designed specifically for driving highly-capacitive or relatively low-impedance loads. It is particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers. The eight flip-flops of the 74ACT11374 are edge-triggered D-type flip-flops. On the positive transition of the clock (CLK) input, the Q outputs are set to the logic levels set up at the data (D) inputs. An output-enable (OE) input can be used to place the eight outputs in either a normal logic state (high or low logic levels) or a high-impedance state. In the high-impeda.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | 74ACT11373 |
Texas Instruments |
OCTAL TRANSPARENT D-TYPE LATCH | |
2 | 74ACT11377 |
Philips |
OCTAL D-TYPE FLIP-FLOP | |
3 | 74ACT11377 |
Texas Instruments |
OCTAL D-TYPE FLIP-FLOP | |
4 | 74ACT11378 |
Texas Instruments |
HEX D-TYPE FLIP FLOP | |
5 | 74ACT11379 |
Texas Instruments |
QUAD D-TYPE FLIP FLOP | |
6 | 74ACT11352 |
Texas Instruments |
DUAL 4-LINE TO 1-LINE DATA SELECTOR/MULTIPLEXER | |
7 | 74ACT11353 |
Texas Instruments |
Dual 1-of-4 Data Selectors/Multiplexers | |
8 | 74ACT11 |
STMicroelectronics |
TRIPLE 3-INPUT AND GATE | |
9 | 74ACT11000 |
Texas Instruments |
QUADRUPLE 2-INPUT POSITIVE-NAND GATES | |
10 | 74ACT11002 |
Texas Instruments |
QUADRUPLE 2-INPUT POSITIVE-NOR GATES | |
11 | 74ACT11004 |
Texas Instruments |
HEX INVERTER | |
12 | 74ACT11008 |
Texas Instruments |
QUADRUPLE 2-INPUT POSITIVE-AND GATE |