This 8-bit latch features 3-state outputs designed specifically for driving highly-capacitive or relatively low-impedance loads. It is particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers. The eight latches of the 74ACT11373 are transparent D-type latches. While the latch-enable (LE) input is hi.
3-state outputs designed specifically for driving highly-capacitive or relatively low-impedance loads. It is particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers. The eight latches of the 74ACT11373 are transparent D-type latches. While the latch-enable (LE) input is high, the Q outputs follow the data (D) inputs. When the enable is taken low, the Q outputs are latched at the levels that were set up at the D inputs. A buffered output-enable (OE) input can be used to place the eight outputs in either a normal logic state (high or l.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | 74ACT11374 |
Texas Instruments |
OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOP | |
2 | 74ACT11377 |
Philips |
OCTAL D-TYPE FLIP-FLOP | |
3 | 74ACT11377 |
Texas Instruments |
OCTAL D-TYPE FLIP-FLOP | |
4 | 74ACT11378 |
Texas Instruments |
HEX D-TYPE FLIP FLOP | |
5 | 74ACT11379 |
Texas Instruments |
QUAD D-TYPE FLIP FLOP | |
6 | 74ACT11352 |
Texas Instruments |
DUAL 4-LINE TO 1-LINE DATA SELECTOR/MULTIPLEXER | |
7 | 74ACT11353 |
Texas Instruments |
Dual 1-of-4 Data Selectors/Multiplexers | |
8 | 74ACT11 |
STMicroelectronics |
TRIPLE 3-INPUT AND GATE | |
9 | 74ACT11000 |
Texas Instruments |
QUADRUPLE 2-INPUT POSITIVE-NAND GATES | |
10 | 74ACT11002 |
Texas Instruments |
QUADRUPLE 2-INPUT POSITIVE-NOR GATES | |
11 | 74ACT11004 |
Texas Instruments |
HEX INVERTER | |
12 | 74ACT11008 |
Texas Instruments |
QUADRUPLE 2-INPUT POSITIVE-AND GATE |