The bq2018 is a low-cost charge/discharge counter peripheral packaged in an 8-pin TSSOP or SOIC. It works with an intelligent host controller, providing state-of-charge information for rechargeable batteries. The bq2018 measures the voltage drop across a low-value series sense resistor between the negative terminal of the battery and the battery pack ground .
➤ Multifunction charge/discharge counter ➤ Resolves signals less than 12.5µV ➤ Internal offset calibration improves accuracy ➤ 1024 bits of NVRAM configured as 128 x 8 ➤ Internal temperature sensor for self-discharge estimation ➤ Single-wire serial interface ➤ Dual operating modes: - Operating: <80µA - Sleep: <10µA ➤ REG output for low-cost microregulation General Description The bq2018 is a low-cost charge/discharge counter peripheral packaged in an 8-pin TSSOP or SOIC. It works with an intelligent host controller, providing state-of-charge information for rechargeable batteries. The bq2018 .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | BQ2010 |
UNITRODE |
Gas Gauge IC | |
2 | BQ2011 |
UNITRODE |
Gas Gauge IC | |
3 | BQ2011K |
UNITRODE |
Gas Gauge IC | |
4 | BQ2012 |
UNITRODE |
Gas Gauge IC | |
5 | BQ2013H |
Benchmarq |
Gas Gauge IC | |
6 | BQ2014 |
UNITRODE |
Gas Gauge | |
7 | BQ2014H |
Benchmarq |
Low-Cost NiCd/NiMH Gas Gauge | |
8 | bq2016 |
Texas Instruments |
GAS GAUGE | |
9 | BQ2019 |
Texas Instruments |
Advanced Battery Monitor | |
10 | BQ2000 |
Texas Instruments |
Programmable Multi-Chemistry Fast-Charge Management | |
11 | BQ2000T |
Texas Instruments |
Programmable Multi-Chemistry Fast-Charge Management | |
12 | BQ2001-7R |
Power-One |
60...132 Watt DC-DC Converters |