The µ PC1934 is an IC that controls a low-voltage input DC-DC converter. This IC is suitable for an operation with 3-V, 3.3-V input or a lithium ion secondary battery input, because the minimum operation supply voltage is 2.5 V. Because of its wide operating voltage range, it can also be used to control DC-DC converters that use an AC adapter for input. FEA.
• Low supply voltage: 2.5 V (MIN.)
• Operating voltage range: 2.5 to 20 V (breakdown voltage: 30 V)
• Timer latch circuit for short-circuit protection.
• Ceramic capacitor with low capacitance (0.1 µ F) can be used for short-circuit protection.
• Open drain outputs (Each of the outputs can be used to control a step-down converter, a step-up converter and an inverted converter.)
• Can control two output channels.
ORDERING INFORMATION
Part Number Package 16-pin plastic SSOP (5.72 mm (225)) 16-pin plastic TSSOP (5.72 mm (225))
µ PC1934GR-1JG µ PC1934GR-PJG
The information in this document is s.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | UPC1933 |
NEC |
DC-DC CONVERTER CONTROL IC | |
2 | UPC1935 |
NEC |
DC-DC CONVERTER CONTROL IC | |
3 | UPC1905 |
NEC |
SWITCHING REGULATOR CONTROL CIRCUIT FOR 500 kHz OPERATION | |
4 | UPC1906 |
NEC |
SWITCHING REGULATOR CONTROL CIRCUIT FOR 500 kHz OPERATION | |
5 | UPC1906 |
NEC |
SWITCHING REGULATOR CONTROL CIRCUIT FOR 500 kHz OPERATION | |
6 | UPC1909 |
NEC |
SWITCHING REGULATOR CONTROL IC | |
7 | UPC1943 |
NEC |
ADJUSTABLE PRECISION SHUNT REGULATORS | |
8 | UPC1944 |
NEC |
ADJUSTABLE PRECISION SHUNT REGULATORS | |
9 | UPC1008C |
ETC |
Phase Frequexcy Detector | |
10 | UPC1028H |
NEC |
FM IF Amplifier with Differential Peak Detector | |
11 | UPC1031H |
ETC |
UPC1031H | |
12 | UPC1031H2 |
NEC |
Vertical Deflection Device |