DATA SHEET Bipolar Analog Integrated Circuit µPC1909 SWITCHING REGULATOR CONTROL IC The µPC1909 is a switching regulator control IC ideal for primary side control of active-clamp type Note DC/DC converters. This IC has 2 outputs employing a totem-pole circuit with peak output current 1.2 A, and is capable of directly driving a power MOS-FET. As a resu.
• 2 on-chip outputs; for Q and Q
• Capable of directly driving a power MOS-FET
• Drive supply voltage range: 7 V to 24 V
• On-chip remote control circuit
• On-chip pulse-by-pulse overcurrent protection circuit
• On-chip overvoltage latch circuit
ORDERING INFORMATION
Part Number Package 16-pin plastic DIP (300 mils) 16-pin plastic SOP (300 mils)
µPC1909CX µPC1909GS
The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC repre.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | UPC1905 |
NEC |
SWITCHING REGULATOR CONTROL CIRCUIT FOR 500 kHz OPERATION | |
2 | UPC1906 |
NEC |
SWITCHING REGULATOR CONTROL CIRCUIT FOR 500 kHz OPERATION | |
3 | UPC1906 |
NEC |
SWITCHING REGULATOR CONTROL CIRCUIT FOR 500 kHz OPERATION | |
4 | UPC1933 |
NEC |
DC-DC CONVERTER CONTROL IC | |
5 | UPC1934 |
NEC |
DC-DC CONVERTER CONTROL IC | |
6 | UPC1935 |
NEC |
DC-DC CONVERTER CONTROL IC | |
7 | UPC1943 |
NEC |
ADJUSTABLE PRECISION SHUNT REGULATORS | |
8 | UPC1944 |
NEC |
ADJUSTABLE PRECISION SHUNT REGULATORS | |
9 | UPC1008C |
ETC |
Phase Frequexcy Detector | |
10 | UPC1028H |
NEC |
FM IF Amplifier with Differential Peak Detector | |
11 | UPC1031H |
ETC |
UPC1031H | |
12 | UPC1031H2 |
NEC |
Vertical Deflection Device |