The µ PC1933 is an IC that controls a low-voltage input DC-DC converter. This IC is suitable for an operation with3-V, 3.3-V input or a lithium ion secondary battery input, because the minimum operating supply voltage is 2.5 V. Because of its wide operating voltage range, it can also be used to control DC-DC converters that use an AC adapter for input. FEAT.
• Low supply voltage: 2.5 V (MIN.)
• Operating voltage range: 2.5 to 20 V (breakdown voltage: 30 V)
• Timer latch circuit for short-circuit protection.
• Ceramic capacitor with low capacitance (0.1 µ F) can be used for short-circuit protection.
• Open drain output (1 cannel: This output can be used to control a step-down converter, a step-up converter.)
• Dead time is internally fixed to 85 %.
• Soft start function (with a circuit to convert the timer latch circuit.)
ORDERING INFORMATION
Part Number Package 8-pin plastic SOP (5.72 mm (225))
µ PC1933GR
The information in this document is sub.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | UPC1934 |
NEC |
DC-DC CONVERTER CONTROL IC | |
2 | UPC1935 |
NEC |
DC-DC CONVERTER CONTROL IC | |
3 | UPC1905 |
NEC |
SWITCHING REGULATOR CONTROL CIRCUIT FOR 500 kHz OPERATION | |
4 | UPC1906 |
NEC |
SWITCHING REGULATOR CONTROL CIRCUIT FOR 500 kHz OPERATION | |
5 | UPC1906 |
NEC |
SWITCHING REGULATOR CONTROL CIRCUIT FOR 500 kHz OPERATION | |
6 | UPC1909 |
NEC |
SWITCHING REGULATOR CONTROL IC | |
7 | UPC1943 |
NEC |
ADJUSTABLE PRECISION SHUNT REGULATORS | |
8 | UPC1944 |
NEC |
ADJUSTABLE PRECISION SHUNT REGULATORS | |
9 | UPC1008C |
ETC |
Phase Frequexcy Detector | |
10 | UPC1028H |
NEC |
FM IF Amplifier with Differential Peak Detector | |
11 | UPC1031H |
ETC |
UPC1031H | |
12 | UPC1031H2 |
NEC |
Vertical Deflection Device |